intake throttle body ? February 28, 2006, 11:02:45 AM 1st ? Which one yields more power a aftermarket cobra intake upper and lower or the typhoon performer plus. also would a 70mm tb cause any problems since im runnin a speed density set up. Quote Selected
intake throttle body ? Reply #1 – February 28, 2006, 03:31:06 PM I think the 70mm is a little to much with stock HO+SD.But thats just my opinion,The intakes are both good but you would yield more with more cam with them than an ho of course mass air. Quote Selected
intake throttle body ? Reply #2 – February 28, 2006, 04:29:00 PM That Throttle body is a little much for stock HO cam and heads. It'll work with speed density though.Read these, there's some good info in em......http://www.foxtbirdcougarforums.com/showthread.php?t=96&highlight=speed+densityhttp://www.foxtbirdcougarforums.com/showthread.php?t=1070&highlight=speed+densityhttp://www.foxtbirdcougarforums.com/showthread.php?t=2028&highlight=speed+density Quote Selected
intake throttle body ? Reply #3 – February 28, 2006, 04:43:45 PM Quote from: svtbird1st ? Which one yields more power a aftermarket cobra intake upper and lower or the typhoon performer plus. also would a 70mm tb cause any problems since im runnin a speed density set up.the 70mm will be fine on either.I would use the cobra intake i wasnt real happy with the fit and finished of the last perf products intake. Quote Selected
intake throttle body ? Reply #4 – February 28, 2006, 09:50:51 PM From experience I know speed density is pretty intolerant to any modifications . It takes a alot of mods to really even need a 65mm TB. If you have the stock cam forget about it. Quote Selected
intake throttle body ? Reply #5 – March 01, 2006, 08:38:38 AM im sorry i forgot to mention i am installing a e-303 cam,24 lb injectors, 1.6 rockers new lifters as well. also A shop offered to tune my computer maybe that will help? Quote Selected
intake throttle body ? Reply #6 – March 01, 2006, 09:30:40 AM you will need a computer that is set up for 24 lb injectors. You are talking mass air computer right there. It will run, but prolly like ass. Quote Selected
intake throttle body ? Reply #7 – March 01, 2006, 03:25:11 PM E-cam has 112* lobe separation.....might have idle/vacuum issues. A lot of speed density guys go with the Crower 15511 cam. Just something you may want to look into. Quote Selected