Skip to main content ↑ ↓
Topic: Help with wiring of 6 bank clip on distributor,on 1984 thunderbird 5.0! Please! (Read 1040 times) previous topic - next topic

Help with wiring of 6 bank clip on distributor,on 1984 thunderbird 5.0! Please!

Hey guys I need some help with hooking up this clip on the distributor, it was hooked up and run with tape!!From the person before me.. So I heat shrinked one at a time I thought, but now I have zero spark,  so I'm guessing I screwed up somewhere.. This was a car from my late uncle that has passed and means alot too me..So you're help is very much appreciated Thank you...

Help with wiring of 6 bank clip on distributor,on 1984 thunderbird 5.0! Please!

Reply #1 –
Can't quite picture what you have going on there.
Maybe this will help:

Help with wiring of 6 bank clip on distributor,on 1984 thunderbird 5.0! Please!

Reply #2 –
There are replacement plugs available, all that should be necessary is match color...


BTW I do know wiring is different colors on E/F series and maybe other vehicles as well, I believe Mustang & Fox Bird are same...

Help with wiring of 6 bank clip on distributor,on 1984 thunderbird 5.0! Please!

Reply #3 –
Thank you guys! I had the wiring all right didn't have some other clips hook up on the driver side! Now I have spark tested it on a light that shocked the piss outta me!! But still not starting?? Sprayed started fluid and it fired on that and I revved it trying to get it to catch and stay running. But no luck?  I watched the injectors spraying gas in to the bowl but won't start? When I parked the car it ran? Any suggestions

Help with wiring of 6 bank clip on distributor,on 1984 thunderbird 5.0! Please!

Reply #4 –
And I replaced the ground on the battery to the engine, and the positive wire to the solenoid..And put 5 gal of 91 octane with Lucas fuel treatment and it won't start?
 

Help with wiring of 6 bank clip on distributor,on 1984 thunderbird 5.0! Please!

Reply #5 –
And I replaced the ground on the battery to the engine, and the positive wire to the solenoid..And put 5 gal of 91 octane with Lucas fuel treatment and it won't start?