Stinger header

Topic: Stinger header (Read 1347 times) previous topic - next topic

Stinger header

August 23, 2013, 03:02:39 AM

Does anybody have any experience with the stinger center mount headers? I can't find a picture of the to see if it is a D shape like the ebay ones (Which from all other angles besides the angle that shows the , look like the stinger headers) or an oval that perfectly matches up to the head.
Here is a D shape one that I see alot. http://www.xs-power.com/ford-turbo-manifolds-2.htm

Stinger header

Reply #1 – August 23, 2013, 05:04:02 AM

The headers you posted are . Reason being no 2.3 exhaust manifold uses a GASKET!!! Or should i say any i use!!!

Stinger header

Reply #2 – August 23, 2013, 10:36:36 AM

I had one along time ago. I dont recall it looking like a D shape like that, but as I said it was long ago and the design may have changed.

Stinger header

Reply #3 – August 23, 2013, 03:43:35 PM

Quote from: TOM Renzo;420491

The headers you posted are . Reason being no 2.3 exhaust manifold uses a GASKET!!! Or should i say any i use!!!

I'm confused...

when I tore my 2.3 out of my TC, there was a gasket between the manifold and the head...

Stinger header

Reply #4 – August 23, 2013, 06:20:22 PM

Not from the factory!!

Stinger header

Reply #5 – August 26, 2013, 11:59:44 PM

I used a cheapo gasket once...burned out...like Tom said...no gasket...some people have luck with abit of High-temp RTV....

Travis

Stinger header

Reply #6 – August 27, 2013, 12:30:18 AM

Got a buddy with a svo and a ebay header kep blowing gaskets out and had cracks fixed more than one time

Finally just put the stock one on lol

Stinger header

Reply #7 – August 27, 2013, 04:31:34 AM

Quote from: STANG8U;420665

Got a buddy with a svo and a ebay header kep blowing gaskets out and had cracks fixed more than one time

Finally just put the stock one on lol

Truer words were never spoken. 100% correct