Replaced the speakers, using stock HU and AMP December 19, 2011, 07:35:47 PM Turned out to sound good! :DI have a whole $50 in the speakers Quote Selected
Replaced the speakers, using stock HU and AMP Reply #1 – December 20, 2011, 09:44:32 AM Did you run all new wiring? Quote Selected
Replaced the speakers, using stock HU and AMP Reply #2 – December 20, 2011, 12:08:13 PM Nope. Just replaced the speakers. everything still ran by Original amp and head unit.Turned out to work better then I expected it to. Quote Selected
Replaced the speakers, using stock HU and AMP Reply #3 – December 20, 2011, 01:44:02 PM I put some new Kenwoods in the doors, I need to do the front and rears also. Quote Selected
Replaced the speakers, using stock HU and AMP Reply #4 – December 20, 2011, 08:03:04 PM What sizes did you use in the dash, door, and rear deck? Quote Selected
Replaced the speakers, using stock HU and AMP Reply #5 – December 21, 2011, 12:52:39 AM Factory sizes.http://www.onlinecarstereo.com/CarAudio/p_28271_Pyle_PLX572.aspxhttp://www.onlinecarstereo.com/CarAudio/p_24378_Pyle_PLG32.aspxhttp://www.onlinecarstereo.com/CarAudio/p_24399_Pyle_PLRL52.aspx Quote Selected
Replaced the speakers, using stock HU and AMP Reply #6 – December 22, 2011, 06:04:18 PM Quote from: bullitt4514;375888Turned out to sound good! :DI have a whole $50 in the speakers :headbang: Quote from: bullitt4514;375913Nope. Just replaced the speakers. everything still ran by Original amp and head unit.Turned out to work better then I expected it to. Quote from: bullitt4514;375963Factory sizes.http://www.onlinecarstereo.com/CarAudio/p_28271_Pyle_PLX572.aspxhttp://www.onlinecarstereo.com/CarAudio/p_24378_Pyle_PLG32.aspxhttp://www.onlinecarstereo.com/CarAudio/p_24399_Pyle_PLRL52.aspx Dude, that is bad ass. Did you have to drill ANY holes or cut ANY metal or was it all plug-and-play? Do the door speakers protrude into the door panel grille or into the window track area? Quote Selected
Replaced the speakers, using stock HU and AMP Reply #7 – December 23, 2011, 09:26:25 PM The speakers I used fit like stock. On the door panels the mounting holes did not line up with the oe speakers, but a drill fixes that easy enough. Quote Selected
Replaced the speakers, using stock HU and AMP Reply #8 – December 26, 2011, 09:04:22 AM I have those pyles in my Pontiac and I was suprised by how good they sound . Quote Selected
Topic: Replaced the speakers, using stock HU and AMP (Read 3208 times)
previous topic - next topic
