Skip to main content ↑ ↓
Topic: 86 Turbo Tbird IAC TPS CTS HARNESS Questions/Issue (Read 777 times) previous topic - next topic

86 Turbo Tbird IAC TPS CTS HARNESS Questions/Issue

Well, I thought my idle issue in my black 86 TC was the IAC, but after I installed a new one, I'm still getting that same erratic idle problem. I tried to compare it to my harness on my 87, but they dont look the same. Seems that the IAC is directly in the harness, and there is only one plug coming out of the harness, not two like in my 86.
Pic...


So I stripped down the IAC harness THAT THE LAST GUY JIMMY'd up. Is this correct? Is there something soldered to a wrong wire?


Also what I thought was curious is the car wouldnt start when I pulled the connector off the Coolant Temp Sensor that is between the 2 and 3 injector on the lower intake.
Motorsport FMIC, Boport 1.5, Boblee header, gutted upper, profiled lower, phenolic spacer, Accufab fpr, LA3, Boport stage 3 big valve head, 57 trim/stage III Perfromance Techniques custom turbo, stinger 3" DP and custom 3"exhaust, AEM wideband, custom aluminum carnk pulley, Merkur custom A/C setup, PA performance high output 3G alt, dual oil catcj cans, Motorsport Valve cover,full Motorcraft tune up kit, 22psi of LOCO!!

86 Turbo Tbird IAC TPS CTS HARNESS Questions/Issue

Reply #1 –
Come on guys! Someone has to know:(
Motorsport FMIC, Boport 1.5, Boblee header, gutted upper, profiled lower, phenolic spacer, Accufab fpr, LA3, Boport stage 3 big valve head, 57 trim/stage III Perfromance Techniques custom turbo, stinger 3" DP and custom 3"exhaust, AEM wideband, custom aluminum carnk pulley, Merkur custom A/C setup, PA performance high output 3G alt, dual oil catcj cans, Motorsport Valve cover,full Motorcraft tune up kit, 22psi of LOCO!!

86 Turbo Tbird IAC TPS CTS HARNESS Questions/Issue

Reply #2 –
It looks correct, best I can tell from studying the 86 EVTM.
The IAC connector has been replaced with one having two red wires.
Take the tape off the wire splices and see if they are soldered splices.
Is splice S 155 soldered?

86 Turbo Tbird IAC TPS CTS HARNESS Questions/Issue

Reply #3 –
More

86 Turbo Tbird IAC TPS CTS HARNESS Questions/Issue

Reply #4 –
In the last diagram it shows a idle speed actuator. Where is that exactly?
Motorsport FMIC, Boport 1.5, Boblee header, gutted upper, profiled lower, phenolic spacer, Accufab fpr, LA3, Boport stage 3 big valve head, 57 trim/stage III Perfromance Techniques custom turbo, stinger 3" DP and custom 3"exhaust, AEM wideband, custom aluminum carnk pulley, Merkur custom A/C setup, PA performance high output 3G alt, dual oil catcj cans, Motorsport Valve cover,full Motorcraft tune up kit, 22psi of LOCO!!
 

86 Turbo Tbird IAC TPS CTS HARNESS Questions/Issue

Reply #5 –
Quote from: RDOG;372660
In the last diagram it shows a idle speed actuator. Where is that exactly?
It's what most people call the IAC (Idle Air Control)
In the 87 EVTM they call it: "Throttle Air Bypass Valve Solenoid"
In the 87 EVTM it does show that they did away with connectors C144 and C145 and made it all part of the main harness.