Skip to main content ↑ ↓
Topic: V8 Tach Search (Read 1455 times) previous topic - next topic

V8 Tach Search

Hello,

I'm looking for a donor tach for my 88 tbird, what years mustang cougar or bird will swap into my 88 tc cluster ? (needs to be for v8)

Preferably with no modding to the housing. I don't mind doing a bit of rewiring. I originally added a resistor to mine to make it read right but when it gets to 5k it sticks now.
88 Turbocoupe: Coast High Performance 331 kit 28oz balance, Comp XE264HR14 cam, 58cc 185 afr heads, 1.7 roller rockers, Mass-Flo EFI (was POS to setup and their techline is a joke at best)
Full 1 5/8 primary equal length headers, 2 1/2 exhaust, Full manual reverse VB c4 and baked off clear coat "BECAUSE RACECAR"

V8 Tach Search

Reply #1 –
'88 Sport and XR-7, I beleive are the only ones.
95 Ranger Splash 2.3
88 Tbird Sport :ies::ies:
5.0 SO, stainless shorty headers, w/ Magnaflow lers. KYB struts, KYB shocks. 5lug conversion from sn95 Mustang, subframe connectors, drilled and slotted rotors, 03 Mach 1 wheels. sequential taillights.140 speedo

V8 Tach Search

Reply #2 –
No mustang ones will swap over?
88 Turbocoupe: Coast High Performance 331 kit 28oz balance, Comp XE264HR14 cam, 58cc 185 afr heads, 1.7 roller rockers, Mass-Flo EFI (was POS to setup and their techline is a joke at best)
Full 1 5/8 primary equal length headers, 2 1/2 exhaust, Full manual reverse VB c4 and baked off clear coat "BECAUSE RACECAR"

V8 Tach Search

Reply #3 –
Not without alot of "customizing".
Mike

V8 Tach Search

Reply #4 –
Just be patient til you can find the right tach. Do it right the first time.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

V8 Tach Search

Reply #5 –
I'm planning on converting the TurboCoupe Tach to V8 by doing the resistor mod...
http://www.coolcats.net/modifying/4to8tach.html

But I also plan to use the boost gauge that is part of it.
 

V8 Tach Search

Reply #6 –
I did the resistor mod, now doesn't want to read right 5k range, i'd like to shift it it at 5.5-6k and dont' want to guess. If it comes down to close in price, might just do aftermarket and graft in.
88 Turbocoupe: Coast High Performance 331 kit 28oz balance, Comp XE264HR14 cam, 58cc 185 afr heads, 1.7 roller rockers, Mass-Flo EFI (was POS to setup and their techline is a joke at best)
Full 1 5/8 primary equal length headers, 2 1/2 exhaust, Full manual reverse VB c4 and baked off clear coat "BECAUSE RACECAR"