Skip to main content ↑ ↓
Topic: omage to carpimp (Read 1570 times) previous topic - next topic

omage to carpimp

all I could think of as per replies in this thread were gonna be bashing on the carpimp... but i believe i executed this almost perfectly. Story started with my truck being the 8 or 9 different colors it was... to being plain jane flat black... well the flat needed a bit of spicing up so the bottom half of the truck went gloss black rubber undercoating.... along with the wheel wells.

Fast foreward to today.... I got bored and had some stuff layin around. and to top it off i always loved the R/T stripe on the older mopars and the new rumble bee...

combine the two... and we have this.







and i couldnt have a post in here without the bird and cat.... they are nestled away in my garage




now the reason i call this Omage to Carpimp is... my stripe was nothing but masking tape spray paint and stickers.

looks good to me... how about you?:hick:

omage to carpimp

Reply #1 –
You got some overspray past the tape lines....
Other than a good buffing to get the overspray off it looks good.

And it's Homage :hick:
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

omage to carpimp

Reply #2 –
It's not too bad.....I suppose.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

omage to carpimp

Reply #3 –
I always thought you were gay.....  now I know....

































JK......  looks ok.

omage to carpimp

Reply #4 –
Dude thats COOOL thats like the Rumble Bee dodge rams. Love it. :bowdown:
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

omage to carpimp

Reply #5 –
homage, i was being a jerk by spelling it wrong lol

and thanks for the comments... it looks badass in the sun

omage to carpimp

Reply #6 –
I think it needs the pin stripe on both sides of the larger stripe,not just the back....to balance it out.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

omage to carpimp

Reply #7 –
I think you should sell that 83 Cougar in your garage, I know someone who will buy it.
One 88

omage to carpimp

Reply #8 –
I think it looks pretty good.

BTW how's the T-bird running? ;)
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

omage to carpimp

Reply #9 –
that 83 is not going ANYWHERE. :D

and the bird runs fine... needs to be taken out some more... ive only driven it on the road 3 times this summer.... and it was to go get parts for the truck.

omage to carpimp

Reply #10 –
Oh I thought you were driving the Bird more with the T5 in it now ;)
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

omage to carpimp

Reply #11 –
i havent really driven anything other than the truck this summer.... ive ran a tank through the cat... and i just put $20 worth of premium in the bird


it drives really good... just need to work some shiznit out.... cat needs more attention at the moment... and the attention it needs is cheaper than what the bird needs/wants

omage to carpimp

Reply #12 –
Looks good and how the hell did you know i was thinking about that for my wrecked 87 T-Bird "only thing i would of changed is the R/T out for a GT just because GT is more of a ford thing. Along with the Corvette Grandsport 2 small red stripes on the drivers side fender. last and red pinstirpe on one side and blue pinstripe on the other side. Then air bursh the trunk lid with some design and Lemans 24 hour style Euro number on the other side. Which i think could be done without overkill or at least without looking bad.
[SIGPIC][/SIGPIC]


http://www.cardomain.com/id/Carpimp1987
1987 T-Bird AEROBIRD-GT had many many mods but is now totaled and is the car that made me want to start customizing everything all over again.
1988 T-Bird 5.0 HO DD/Sleeper/next project car :birdsmily:
1988 Cougar XR7 5.0 HO Vortech Supercharged being bulit right now :cougarsmily:

omage to carpimp

Reply #13 –
Ture Macco paint job and Do it yourself is close to the same thing but looks good.
[SIGPIC][/SIGPIC]


http://www.cardomain.com/id/Carpimp1987
1987 T-Bird AEROBIRD-GT had many many mods but is now totaled and is the car that made me want to start customizing everything all over again.
1988 T-Bird 5.0 HO DD/Sleeper/next project car :birdsmily:
1988 Cougar XR7 5.0 HO Vortech Supercharged being bulit right now :cougarsmily:

 

omage to carpimp

Reply #14 –
Quote from: 87thunderbirdBlackJack;232762
i havent really driven anything other than the truck this summer.... ive ran a tank through the cat... and i just put $20 worth of premium in the bird


it drives really good... just need to work some shiznit out.... cat needs more attention at the moment... and the attention it needs is cheaper than what the bird needs/wants



Ah got ya. Life would be easier if we were all rich. Money (or lack there of :hick: ) slows down most of my car related projects as well.
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.