efi fuel pump question March 06, 2005, 12:17:15 AM can i use the in-tank efi pump on a carb if i regulate it? i want the cleaner install of an in tank fuel pump. any help is appreciated. Quote Selected
Re: efi fuel pump question Reply #1 – March 06, 2005, 03:11:44 PM Isn't a pump from a carbed 5.0 HO (say early 85?) an in tank setup? Quote Selected
Re: efi fuel pump question Reply #2 – March 06, 2005, 04:24:02 PM Quote from: darkthundercan i use the in-tank efi pump on a carb if i regulate it? i want the cleaner install of an in tank fuel pump. any help is appreciated.Yes you can. Just use a regulater, like the Holley one, works great. :D Quote Selected
Re: efi fuel pump question Reply #3 – March 06, 2005, 06:12:18 PM if your starting off with an old bosch in the tank, you have a good start. Some of the rangers and older model subaru's had a fuel pump on the rail of the car as a secondary.just tweek it down to about 19psi there about., give or take depending on what you feel is best. Quote Selected
Re: efi fuel pump question Reply #4 – March 06, 2005, 06:27:10 PM When I ran a carb on my old '86 Cougar, I set the pressure around 8-10 for the holley. Much more than that would lift the needles off thier seats. :D Quote Selected
Re: efi fuel pump question Reply #5 – March 06, 2005, 09:44:10 PM sweet! i should go grab that tank i saw at the junkyard then. looked brand new. thanks a bunch guys. ^_^ Quote Selected
Topic: efi fuel pump question (Read 1666 times)
previous topic - next topic
