Skip to main content ↑ ↓
Topic: need help with brumbrakes (Read 1635 times) previous topic - next topic

need help with brumbrakes

i had to replace my back brake lines and went to bleed them and i could not get any fluide. i checked the lines and block where they come out of and its all clear. i pulled the mane line off the block on the rearend and i get a small amount of fluide out of it. dose any one know whats rong?
[SIGPIC][/SIGPIC]
88 5.0L aod with duel flowmaster and speedo mod
88 5.0L H.O with 5 speed R.I.P
87 3.8L no trans. geting h.o and 5speed (project never ending thunder) started it as of 8-14-10
96 bronco xl 5.0L 5 speed man4x4
:birdsmily:

need help with brumbrakes

Reply #1 –
Are the wheel cylinders any good?
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

need help with brumbrakes

Reply #2 –
i had to replace the pass. side and the driver side is fine
[SIGPIC][/SIGPIC]
88 5.0L aod with duel flowmaster and speedo mod
88 5.0L H.O with 5 speed R.I.P
87 3.8L no trans. geting h.o and 5speed (project never ending thunder) started it as of 8-14-10
96 bronco xl 5.0L 5 speed man4x4
:birdsmily:

need help with brumbrakes

Reply #3 –
is the valve not centered in the prop valve? sometime with a major leak they will over center and cut fluid flow to the rear brakes
[SIGPIC][/SIGPIC]
1974 maverick lsx powered turbo car SOLD
1973 maverick Tijuana Taxi Tribute
1957 chevy LSX Turbo project (race car)
Owner of Joe Dirt Fabrication

need help with brumbrakes

Reply #4 –
do u meain the hole in the side of the bolt and the block on the main line for the back brakes?
[SIGPIC][/SIGPIC]
88 5.0L aod with duel flowmaster and speedo mod
88 5.0L H.O with 5 speed R.I.P
87 3.8L no trans. geting h.o and 5speed (project never ending thunder) started it as of 8-14-10
96 bronco xl 5.0L 5 speed man4x4
:birdsmily:

need help with brumbrakes

Reply #5 –
whats the prop valve? i dont know a lot of the parts names
[SIGPIC][/SIGPIC]
88 5.0L aod with duel flowmaster and speedo mod
88 5.0L H.O with 5 speed R.I.P
87 3.8L no trans. geting h.o and 5speed (project never ending thunder) started it as of 8-14-10
96 bronco xl 5.0L 5 speed man4x4
:birdsmily:

need help with brumbrakes

Reply #6 –
Dem Brumbrakes can be tough.
One 88
 

need help with brumbrakes

Reply #7 –
Quote from: CougarSE;176400
Dem Brumbrakes can be tough.


LMFAO.

Hey Sleeper - is that your "sleeper" in your profile? :D
11.96 @ 118 MPH old 306 KB; 428W coming soon.