Mustang strut tower brackets with polly bushings February 03, 2010, 10:01:08 PM For sale is a set of energy suspension strut tower bushings with mounts for a mustang. The only thing you have to do is drill a new hole to mount them, this way you can use mustang struts like strange and other manufactures. I am no longer using them because I bought C.C. plates for my car, I will take $25. shipped. Also less then 1,000 miles on them Quote Selected
Mustang strut tower brackets with polly bushings Reply #1 – February 04, 2010, 08:45:43 PM anyone????? Quote Selected
Mustang strut tower brackets with polly bushings Reply #2 – February 10, 2010, 09:23:34 AM So if I were to buy these would I be able to run mustang struts on my 87 bird?? Quote Selected
Mustang strut tower brackets with polly bushings Reply #3 – February 10, 2010, 05:03:28 PM yes, but you have to drill 1 new hole about 3/8 to 1/2" because the front one is a little closer then the birds. I had these on my 86' with Strange mustang struts, very simple install Quote Selected
Mustang strut tower brackets with polly bushings Reply #4 – February 23, 2010, 08:17:00 PM bump Quote Selected
Mustang strut tower brackets with polly bushings Reply #5 – April 04, 2010, 06:51:38 PM $20. shipped Quote Selected
Mustang strut tower brackets with polly bushings Reply #6 – April 04, 2010, 08:50:56 PM sold pm me your info Thanks Quote Selected
Mustang strut tower brackets with polly bushings Reply #7 – April 06, 2010, 11:59:34 AM OK so after searching and reading for the strut options for the bird I need some help figuring out what struts to order for my 87 TC using these strut tower bushings I would like a little bit firmer ride and am planning on using all new polly control arm bushings with Mach springs. For the rear I am probably going to use a set of Chucks shock mounts and the KYB adjustable shocks. Any help would be appricaiated. Quote Selected
Mustang strut tower brackets with polly bushings Reply #8 – April 06, 2010, 02:09:13 PM I have the strange 10 way adj. (for the fox mustangs) and you can dial them in to what type of driving you do. http://www.jegs.com/i/Strange+Engineering/873/S6001EM/10002/-1 Quote Selected
Mustang strut tower brackets with polly bushings Reply #9 – April 06, 2010, 03:09:06 PM Will those work in my 87 TC using the mounts that I bought from you? Quote Selected
Mustang strut tower brackets with polly bushings Reply #10 – April 06, 2010, 03:39:50 PM I dont know if this will help or not but I recently did some research and as far as I can tell 87 and 88 tbirds use Mustang struts The part numbers listed by Monroe , Gabriel, and KYB are the same for fox Mustangs and 87,88 birds 83-86 birds list different numbers Quote Selected
Mustang strut tower brackets with polly bushings Reply #11 – April 06, 2010, 04:23:31 PM OK I think that NATO just answered my questions I think I will be going with a set of Strange adjustables for the front and the strange adjustables for the rear with chucks adapters. Quote Selected
Mustang strut tower brackets with polly bushings Reply #12 – April 06, 2010, 05:24:48 PM they should since both are fox bodies, but you might want to search for the correct info Quote Selected
Topic: Mustang strut tower brackets with polly bushings (Read 763 times)
previous topic - next topic
Topic: Mustang strut tower brackets with polly bushings (Read 763 times)
previous topic - next topic