Skip to main content ↑ ↓
Topic: Removing steering wheel center cover (Read 1321 times) previous topic - next topic

Removing steering wheel center cover

Anybody know how to get the center of the steering wheel off without breaking it. I am going to the JY and i need a new steering wheel but i have never been able to get the center pad off without breaking it.

Thanks

Removing steering wheel center cover

Reply #1 –
To get the pad off just push it in, twist, and it pops right out :hick:
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

Removing steering wheel center cover

Reply #2 –
Yep,it's that easy.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Removing steering wheel center cover

Reply #3 –
Well it turned out the steering wheel wasnt in that good of shape but now i know how to remove the horn pad atleast.

Thanks Guys

Hey Vinnie, Did you still need the trim with the cutouts for the cornering lights? The right side one on the car i posted the pic of was broke and the only other ones had overspray on them. There were 2 cars that had them but i didn't check the ones with overspray to see if they were broken.

Removing steering wheel center cover

Reply #4 –
Nope,I'm good.I made a trade with a fellow member for his.Thanks a lot for your time looking.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Removing steering wheel center cover

Reply #5 –
No problem i was there to replace the rear qtr panel trim cause mine broke when i was taking them off.
 

Removing steering wheel center cover

Reply #6 –
I used to consider disconnecting the battery before removing the horn pad. I hated having to blast the horn in the driveway for some reason. Of course, I used to mess around with steering wheels all the time. Not so much these days. :wtf:
[SIGPIC][/SIGPIC]