Skip to main content ↑ ↓
Topic: intake (Read 628 times) previous topic - next topic

intake

im installing an upper and lower intake without instructions today and i was looking for a little writeup on doing the install. im mainly looking for torque specs and sequance seeing as how i cant find my  spec book i had. anybody know of any?

intake

Reply #1 –
torque spec and sequence is usually in the package with the gaskets...

For dropping the lower onto the gaskets get 4 long studs and screw them in the corners. This will guide your lower on perfect and will make life easy for you...

I thought you was in the market for heads? Your just gonna have to tare her down again... That gt-40 intake isn't going to do much on the stock motor. Might be a waste of time :( I put my cobra on with the e7's and stock cam and it wasn't much difference. In fact I think I lost some low end torque in the process.

just my :2c:
[SIGPIC][/SIGPIC]

intake

Reply #2 –
yeah, i just want the intake off my tool box. the gaskets are free from autozone with my gift card, and i dont know how long its going to be before i can get the heads... probley at least another month or so, and its giving me a chance to remove the egr spacer. o well... i'll see how it goes. thanks for the info bob.

intake

Reply #3 –
Well, I have all the torque and sequence specs and stuff but that's all at home. I'm at work until 8 tonight. So if you still want them by then, I'll post them up sometime late tonight.
 

intake

Reply #4 –
Here Nate. Courtesy of my local public library and it's online auto reference database...

Hope this helps..

Lower intake

Sorry, don't have a picture but the left column is the passenger side and the right column is the drivers side.

Rear
7-8
3-2
11-10
9-12
1-4
5-6
Front

Tighten in 3 passes
1- 8ft. lbs. 11Nm
2- 16ft. lbs. 22Nm
3- 23-25ft. lbs. 31-34Nm

Upper intake- didn't say any specific sequence.
tighten 12-18ft.lbs.