Stuff for sale Reply #15 – February 06, 2006, 10:36:36 AM c00chrick I may get those turbines off of you pending another sale locally. May need them for a new project car. Quote Selected
Stuff for sale Reply #16 – February 06, 2006, 04:38:28 PM Cougarse: Ok... How much time are we looking at?Billyf17: I have no idea what you are talking about. If you could give me a little more information, I might be interested. Quote Selected
Stuff for sale Reply #17 – February 06, 2006, 08:33:26 PM Ok, EFI heads use a fine thread smaller diameter spark plug. As far as I can tell, the heads I have are pre-EGR, meaning they don't have a passage to allow gasses from the heads to the intake manifold to allow for...well EGR.They are D20E heads. They have been milled so the are straight, and have 58cc chambers. The springs tested at 300 lbs at 1.250". The biggest cam that can be used is .525" lift. Flow numbers stall out after that anyway. Other wise they are very nice heads and very very capable if ported correctly. Even stock the flow pretty good. Quote Selected
Stuff for sale Reply #18 – February 07, 2006, 05:20:17 AM Are they set up for hr or solid cam? Quote Selected
Stuff for sale Reply #19 – February 07, 2006, 10:42:21 AM They don't have rockers. Other than that I'm not sure how to tell what cam to use. Quote Selected
Stuff for sale Reply #20 – February 08, 2006, 08:44:29 PM Wait, what? 45 for both? how about that? Shipping to 66901 Quote Selected
Stuff for sale Reply #21 – February 13, 2006, 01:14:19 AM If you still have the flowmasters and tailpipes I'd give you 60 for the pair and meet you in youngstown Quote Selected
Stuff for sale Reply #22 – February 13, 2006, 11:17:25 AM What size is that FMIC? HOW much to ship to 65737? Quote Selected
Stuff for sale Reply #23 – February 15, 2006, 05:54:14 AM Ipsd....Check your pms. Also, $60 shipped. Quote Selected
Stuff for sale Reply #24 – February 15, 2006, 10:40:32 AM I'm interested in pics of the Starion IC as well...Chuckcwarren@indy.net Quote Selected
Stuff for sale Reply #25 – February 15, 2006, 06:56:16 PM Norry, no pics. Theres nothing to see anyways. It has some minor fin bendage but thats it. The longer tube is cut off about an inch up. I still have the rest of tube if you would ever want to put it on. Quote Selected
Stuff for sale Reply #26 – February 15, 2006, 08:02:12 PM Quote from: c00chrickNorry, no pics. Theres nothing to see anyways. It has some minor fin bendage but thats it. The longer tube is cut off about an inch up. I still have the rest of tube if you would ever want to put it on.Well I figured if you can get pics of wheels you can get pics of the IC.No pics? No thanks. Quote Selected
Stuff for sale Reply #27 – February 16, 2006, 04:20:47 PM I had to borrow a friends digi to take the pics. I can't borrow it at the moment. Quote Selected
Topic: Stuff for sale (Read 1586 times)
previous topic - next topic
