Headlamps

January 29, 2006, 10:06:30 AM

Hi, I just finished rewireing my headlamps.
What a differance!
I put in a one relay for each side directly connected to the battery over a fuse.
Cut the feed wire to the headlamp and routed it to the relay coil and from the relay to the lamp wire.
The relay has a mounting hole which fits over the bolt for the light bracket, easily done.
This gives full voltage to the lamp, no loss over the headlight switch and multifunction switch and the switches are not loaded so they won't burn out as quickly.
First I did the driving beams but when they ended up much more powerfull than the long distance beam I did them also.
(4 relays two fuses).
Its essencially the same conection schematic as you would use for extra fog lights.