T-Stat Housing September 10, 2013, 01:16:35 PM Does anyone know where I can buy one?Can't get mine to seal, I think it's warped87 Turbo Coupe-2.3 Quote Selected
T-Stat Housing Reply #1 – September 10, 2013, 01:57:13 PM Does rockauto.com have them? Quote Selected
T-Stat Housing Reply #2 – September 10, 2013, 02:52:48 PM Forget that, I see you're in MI, just go wrench one off at LKQ. Quote Selected
T-Stat Housing Reply #3 – September 10, 2013, 04:20:37 PM you can get a cast housing from the parts store, I bought mine at Oreilly's Quote Selected
T-Stat Housing Reply #4 – September 16, 2013, 09:05:03 PM I hate these stupid Chinese made cast iron thermostat housings! I would find a good used off ebay or from someone on this forum before using another one of those P.O.S. Quote Selected
T-Stat Housing Reply #5 – September 17, 2013, 11:01:20 PM lay it on a belt sander or just sand by hand using a wood block. too easyyou will start to see the low spots indicating worpage ( the un sanded areas)\just keep sanding until the whole surface is scuffed then stop. Quote Selected
T-Stat Housing Reply #6 – October 01, 2013, 08:59:50 PM Quote from: beast50;421801I hate these stupid Chinese made cast iron thermostat housings! I would find a good used off ebay or from someone on this forum before using another one of those P.O.S.One thing I found... I've got a 5.0L '88 XR7 and wanted to replace the thermostat housing... I got two from O'Reillys that were completely the wrong part... it didn't match at all. Doublechecked the part, it was the correct number but the wrong part. Ended up getting the right one at Autozone finally. As always, be sure you check the part for correct fit before you get in a situation where it's difficult to swap it out.Cabby Quote Selected
T-Stat Housing Reply #7 – October 01, 2013, 10:29:36 PM i got an extra one vans, if your interested. Quote Selected
Topic: T-Stat Housing (Read 1246 times)
previous topic - next topic
