Headlight update May 21, 2013, 02:09:22 PM I couldn't find the orig thread, but was a talk of sanding and putting the varnish on headlights, well here is a before and afterAnd my car has been sitting outside for about 6 months since and is still that clear. Quote Selected
Headlight update Reply #1 – May 21, 2013, 04:21:06 PM awsome ,,all in my diy link below but here is the threadheadlamp rework and remirror the insides, clear coat the outter lense http://www.foxtbirdcougarforums.com/...ior&highlight=and the resultsresults of my headlamp modification http://www.foxtbirdcougarforums.com/...ion&highlight=and a buncha other light stuff and goodiesRelay adds to remove heat from headlamp and ignition switch http://www.foxtbirdcougarforums.com/...d-Marker-lamps results of my headlamp modification http://www.foxtbirdcougarforums.com/...ion&highlight= HIGH BEAM *with * low beams on modification ~just an easy jumper wire. ((applicable to those with auto lamps only)) http://www.foxtbirdcougarforums.com/...054#post408054 headlamp rework and remirror the insides, clear coat the outter lense http://www.foxtbirdcougarforums.com/...ior&highlight= headlamp resources cougs & bird headlamps match up with 89>94 linc continental, per Vinnie- he doesnt see linc headlamps as dull as coug or birds Headlamp HID stuff > thanks THEFOEYOUKNOW http://www.theretrofitsource.com/pro...roducts_id=227 http://www.jcwhitney.com/headlight-c...2824j1s17.jcwx HID mod> Thanks TbirdX3 http://www.foxtbirdcougarforums.com/...%29&highlight= Convert your not so accurate amp meter to a volt meter easily http://www.foxtbirdcougarforums.com/...&daysprune=100 Cool down that big resistor on the back of your buttstuffog instrument cluster. This also applies to those with digital clusters except the resistor is smaller. http://www.foxtbirdcougarforums.com/...&daysprune=100 Quote Selected