Clutch Position Switch

April 29, 2013, 01:46:15 PM

Afternoon All !!

Has anyone ever messed-around with the "Clutch Position Switch" ??

I'm still having my Engine Running Problem...it has morphed into Bucking -n- Jerking at most any time. (Yes... I've replaced the TPS)

But what has caught my attention... as I've disengaged the Clutch, to stop the engine from bucking (and such) the engine smooths-out and runs fine. After noticing that fact... I have learned that only depressing the Clutch Pedal a Fraction of an Inch... Everything settles-down and runs fine.

According to my drawings that switch is in a similar circuit with the Neutral Safety... but only wired in Series with that. I was attempting to find a method of 'shorting out' the two wires to see if that make things right.

.. .. any ideas would be Greatly Appreciated !!

Clutch Position Switch

Reply #1 – April 29, 2013, 03:14:06 PM

Never mind....

I got to the connector I wanted to :D
.. attempted the 'work-around' to see what might happen

Nothing changed...