Skip to main content ↑ ↓
Topic: pics of D&D tubular k-member/lakewood strut installed (Read 1711 times) previous topic - next topic

pics of D&D tubular k-member/lakewood strut installed




Re: pics of D&D tubular k-member/lakewood strut installed

Reply #1 –
looks good. Wish I had that wetup on mine.
84 Turbo coupe 2.3T Modded with 88 upper and lower intake, 88 injectors, E6 manifold, T3-4 AR.60 turbo, 31X12X3 FMIC, Homemade MBC , Greddy knock off BPV.
4 eyes see better than 2! 
Da Bird!

FreeBird

Re: pics of D&D tubular k-member/lakewood strut installed

Reply #2 –
Looks great! :D
95 Ranger Splash 2.3
88 Tbird Sport :ies::ies:
5.0 SO, stainless shorty headers, w/ Magnaflow lers. KYB struts, KYB shocks. 5lug conversion from sn95 Mustang, subframe connectors, drilled and slotted rotors, 03 Mach 1 wheels. sequential taillights.140 speedo

Re: pics of D&D tubular k-member/lakewood strut installed

Reply #3 –
Nicely done! Notice any difference in weight between the old parts and the new? ;)

BTW, Canfield heads....they're from out my way. Very nice heads for the money.

Re: pics of D&D tubular k-member/lakewood strut installed

Reply #4 –
yeah there is a night and day differance between the stock stuff and the aftermarket as far as weight is concerned. so far all this has been pretty straight forward install. next comes the manual rack and manual brake conversion. later

Joel

Re: pics of D&D tubular k-member/lakewood strut installed

Reply #5 –
Did you have to grind on your brackets at all? I just installed a Ground Pounder K-member and the back holes were way off. Here's a pic. I also had to shim the front quite a bit. Hopefully today or tomorrow my manual rack will be here. I'll post some pics when I get it on there.
 

Re: pics of D&D tubular k-member/lakewood strut installed

Reply #6 –
the d&d mounted up without any alignemt issues. on the 2 upper mounting plates they didnt exactally fit flush with the frame but once i put the impact on them they sucked right up tight.