Quick help - T3 wastegate snap ring January 04, 2013, 02:07:56 PM Hi guys,I need a quick help. Can someone measure inner size of the snap ring, which holds the wastegate actuator rod on the wastegate lever? I can't measure it with the engine in a car. It's missing on my silver bird :(.Thanks Quote Selected
Quick help - T3 wastegate snap ring Reply #1 – January 04, 2013, 02:52:57 PM these clips work really well for the wastegate linkage I found mine on a chevy truck in the junkyard but you can get them from advance part no. 118-080 Quote Selected
Quick help - T3 wastegate snap ring Reply #2 – January 04, 2013, 08:01:49 PM Thanks, but I can't get these anywhere easily in the Europe.I've found the part number using google and it is 1/8". Is it the inner size, or the size of the shaft? I'm a bit worry, that I will be able to buy only snap rings in metric sizes. 1/8" is just a bit over 3 mm, so I will give it a try :). Quote Selected
Quick help - T3 wastegate snap ring Reply #3 – January 04, 2013, 09:29:06 PM sorry about that forgot to check your location, good luck with the search. Quote Selected
Quick help - T3 wastegate snap ring Reply #4 – January 10, 2013, 09:23:22 AM I always use alligator clips...Travis Quote Selected
Topic: Quick help - T3 wastegate snap ring (Read 940 times)
previous topic - next topic
