Skip to main content
Topic: Transmission Mount '88 TC (Read 2898 times) previous topic - next topic

Transmission Mount '88 TC

Reply #15
mine can't vibrate.. it doesn't move and currently sits turboless :) lol
ShadowMSC.com < < Still Under Construction

R.I.P. 'Zump' 8/29/86 - 11/11/11
3- 87 TC's / 1 really mean 83 Capri RS / 94 Sonoma SAS Project on 37x12.50 TSL Radials / 88 S10 that's LITERALLY cut to pieces / 84 F150 SAS, 351M, 39.5 TSL's / 85 Toyota regular cab, 22R 5spd, 3/4" drop, my little junkyard save/daily driver

Transmission Mount '88 TC

Reply #16
LOL! That definitely cuts down on the vibrations!
...and there was light!

Transmission Mount '88 TC

Reply #17
doesn't help when BJL drives past my house and revs his car :( he's a big meanie.. he not nice to me.. LOL

seriously, there's a possibility that the vibration could be coming from your toasted trans mount.. you figure at those speeds, any little weak link can give you trouble
ShadowMSC.com < < Still Under Construction

R.I.P. 'Zump' 8/29/86 - 11/11/11
3- 87 TC's / 1 really mean 83 Capri RS / 94 Sonoma SAS Project on 37x12.50 TSL Radials / 88 S10 that's LITERALLY cut to pieces / 84 F150 SAS, 351M, 39.5 TSL's / 85 Toyota regular cab, 22R 5spd, 3/4" drop, my little junkyard save/daily driver

Transmission Mount '88 TC

Reply #18
I can grab the back of the front of my drive shaft and move the trans side to side, so it very well could be the trans mount. But if it isn't the only thing really left is the rear, I just can't think of anything else that would give this kind of vibration! I plan on taking it on a 950 mile round trip here in a few weeks and I will be dang gone if I want to deal with this vibration for that many miles!
...and there was light!

Transmission Mount '88 TC

Reply #19
oh .. yeah.. i'm going to bet it's the mount.. if you can do it by hand, just imagine what your driveshaft is doing to it at 70+ lol
ShadowMSC.com < < Still Under Construction

R.I.P. 'Zump' 8/29/86 - 11/11/11
3- 87 TC's / 1 really mean 83 Capri RS / 94 Sonoma SAS Project on 37x12.50 TSL Radials / 88 S10 that's LITERALLY cut to pieces / 84 F150 SAS, 351M, 39.5 TSL's / 85 Toyota regular cab, 22R 5spd, 3/4" drop, my little junkyard save/daily driver

Transmission Mount '88 TC

Reply #20
I hope it fixes it but just in case it doesn't, I went ahead and ordered all of the bushings for the rear control arms and everything to rebuild the brakes on the other rear! :D
...and there was light!

Transmission Mount '88 TC

Reply #21
good luck, i hope i'm right and it's the mount :) lol
ShadowMSC.com < < Still Under Construction

R.I.P. 'Zump' 8/29/86 - 11/11/11
3- 87 TC's / 1 really mean 83 Capri RS / 94 Sonoma SAS Project on 37x12.50 TSL Radials / 88 S10 that's LITERALLY cut to pieces / 84 F150 SAS, 351M, 39.5 TSL's / 85 Toyota regular cab, 22R 5spd, 3/4" drop, my little junkyard save/daily driver

Transmission Mount '88 TC

Reply #22
That mount is shot and it is good you are replacing it. You also get rid of all the junk related to the stock mount. Good call on the replacing it. The stock ones suck!!!
I spend money I don't have, To build  cars I don't need, To impress people I don't know

HAVE YOU DRIVEN A FORD LATELY!!

Transmission Mount '88 TC

Reply #23
Think I found my leaning problem .....

 

Both the green ones came off the same car! Sadly my new ones are shorter than the factory ones .....  grrrrrr lol
...and there was light!

Transmission Mount '88 TC

Reply #24
Links will not cause or correct a LEAN. Just Saying.
I spend money I don't have, To build  cars I don't need, To impress people I don't know

HAVE YOU DRIVEN A FORD LATELY!!

Transmission Mount '88 TC

Reply #25
Quote from: TOM Renzo;385285
Links will not cause or correct a LEAN. Just Saying.

That makes me sad :( ......  lol

I am going to go ahead and install the new ones, I don't see where the length matters to much as long as they are the same.
...and there was light!

 

Transmission Mount '88 TC

Reply #26
you should be alright with the new E.S. endlinks but why is one of the old ones appear longer in the center sleeve area then the other one??