Wiring plug(any cars being parted out)

Topic: Wiring plug(any cars being parted out) (Read 474 times) previous topic - next topic

Wiring plug(any cars being parted out)

January 26, 2011, 04:04:02 PM

http://www.foxtbirdcougarforums.com/showthread.php?30541-AC-clutch-harness-amp-random-plug

Check out the second pic in that post. These are like weatherpack connectors in that you can repin a new connector. These plugs are on the body harness just below the starter solenoid. I think there are more than one 6 position plugs. Id like to get more than one, but i NEED one. Text me with price if you can cut one out of a car you are parting. Ill repin, you can just cut the wires.

713-894-4846 (houston, tx)

Wiring plug(any cars being parted out)

Reply #1 – January 26, 2011, 04:28:25 PM

Will this work

Wiring plug(any cars being parted out)

Reply #2 – January 26, 2011, 04:50:32 PM

Probably not, Id have to see the pins. These are pretty thick. 4 of the 5 wires look to be 12 guage. They are on the ignition circuit, so pretty heavy.

Wiring plug(any cars being parted out)

Reply #3 – January 26, 2011, 05:55:42 PM

This was from a rear view mirror switch from our cars , If that info helps :)

Wiring plug(any cars being parted out)

Reply #4 – January 26, 2011, 07:48:16 PM

I cant see a pic?

Wiring plug(any cars being parted out)

Reply #5 – January 26, 2011, 08:24:43 PM

can you post a pic of the plug you are needing? there are a few different types of pins that were used.

Wiring plug(any cars being parted out)

Reply #6 – January 27, 2011, 10:58:45 AM

This is one that looks just about identical. I do not know for sure if the original kicked out on both sides, or just one because that part crumbled away. This plug is....$100

Im going to go look at a Mustang today to try to snag one.

Wiring plug(any cars being parted out)

Reply #7 – January 27, 2011, 11:05:05 AM

LOL!! $100 thats insane... I bet I have something similar to that I can spare or come up with atleast half of one if you cant get one from the mustang.

Wiring plug(any cars being parted out)

Reply #8 – January 27, 2011, 12:04:28 PM

Yeah, I about spit coffee on my monitor when the guy told me a hundred bones for one plug.

I just picked up two sets of these from the shack.
http://www.radioshack.com/product/index.jsp?productId=2103449

The fifth wire is the trigger wire for the solenoid, so I can just solder that one. Im thinking I can just squirt some rtv in the back of each plug after I pin it, then electrical tape the heck out of it since these aren't really weather resistant.

Looking at it last night, I think I can cut the harness back and get enough extra wire to make this work.

Wiring plug(any cars being parted out)

Reply #9 – January 28, 2011, 07:33:06 AM

Let me know if you still need the plug.

Wiring plug(any cars being parted out)

Reply #10 – January 28, 2011, 05:22:53 PM

THat's the plug for the fusible links in the charging system. I hard-wired mine in after my plug went kablooey.