torque converter ?s

Topic: torque converter ?s (Read 897 times) previous topic - next topic

torque converter ?s

July 28, 2010, 03:51:08 AM

in my 84 bird 5.0 do i have a locking or non locking converter?
someone gave me a 2800 stall lentech non locking converter and i am wondering if it is compatable
i am running a stock bore forged bottom end,tfs stage 2 cam p&p gt40p heads ,dual plane air gap intake and a vac sec 650 carb
thanks for the info
mike

torque converter ?s

Reply #1 – July 28, 2010, 07:18:09 AM

You should contact Lentech but assuming you have a std lockup AOD, no it will not work, will require the input shaft be changed to a one piece type... There are non-lockup converters that can be used but those are designed to use the std AOD dual input shaft..

torque converter ?s

Reply #2 – July 28, 2010, 12:00:00 PM

I have a PI Stallion non-lock up 2800 stall converter and it needed a one piece input shaft. IIRC the Lentech converts are similar and require a one piece input shaft.

torque converter ?s

Reply #3 – July 28, 2010, 01:23:32 PM

so i wud just need to get a hardend one piece input shaft?
the part number for the converter is 24035
mike

torque converter ?s

Reply #4 – July 28, 2010, 05:58:53 PM

Yep. You have to take the trans apart to put it in though.