Skip to main content ↑ ↓
Topic: For those who like to fab (Read 1801 times) previous topic - next topic

For those who like to fab

Anyone who likes to build custom stuff (watchdevil) ;), you might find this interesting.  Not inexpensive but looks like a neat way to do some custom work.

http://www.percyshp.com/HyperFiber.html

Custom Composite Parts
HyperFiber is the revolutionary, time saving, material that allows you to make your own custom composite parts in minutes. No more mixing high odor resins hoping to get exactly the right ratio, trying to get just the right amount of resin on your material, or wasting resin that sets up in the can or drips off on the work surface. HyperFiber has fiber and resin combined with a dry film on each side for the perfect ratio of material and resin EVERY TIME. Simply cut and form HyperFiber in its uncured state to your desired shape inside, out of the sun. Your work time is nearly unlimited! No longer are you working against the clock to try to get everything done before your part sets up. Once you are finished, simply expose the piece to sunlight or a Percy’s UV light source and the HyperFiber will set up in a matter of minutes! With the material used in HyperFiber, you are also able to form it around the most complex curves and angles without having wrinkles or needing to cut the material.
tbirdregistry.com
26480
27373

For those who like to fab

Reply #1 –
Sounds useful.
...and there was light!

For those who like to fab

Reply #2 –
WOW!!!!!!!!!!!! have you seen the price???????????
1986 T-bird
347 stroker motor
185 AFR Heads
TrickFlow cam 224/232-542/563
Victor Jr. intake CNC ported
Quickfuel Holley 800 cfm
Hooker 1-3/4 long tubes
Custom built AOD
B&M 3000 stall
8.8 w/4.30 gears
UPR K-member,A-Arms,and coil-overs
UPR upper/lower control arms
Strange shocks/struts
26x10x15 M/T slicks
11.48@119.27
(coming soon Tremec 3550)
The Finished Product
http://s174.photobucket.com/albums/w92/03grinnie/T-bird/

For those who like to fab

Reply #3 –
lol. no.
...and there was light!

For those who like to fab

Reply #4 –
21 inches by 21 feet for $271.00. That's a lot of material. probably worth it if you do alot of that stuff.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

For those who like to fab

Reply #5 –
can we say make your own cowl hood out of fiberglass? lol
2001 Buick Regal LS (DD):hick:

Got that fox rash again!

-Resident smartass! :ies:

- Don't listen to the naysayers. For every person who actually helps with your project there will be 10 who will discourage you all the while thinking that they are helping. 99% of all people have good intentions. That doesn't make them right.- XR7 Dave - SCCOA.Com

For those who like to fab

Reply #6 –
That may be pushing it's limits.LOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..
 

For those who like to fab

Reply #7 –
Quote from: vinnietbird;322360
21 inches by 21 feet for $271.00. That's a lot of material. probably worth it if you do alot of that stuff.


12" x 21' -- $271

or

12" x 5' for a mere $83  :hick:

Or we could a group buy of the 21' roll and it would only cost $13* for a 12"x12" piece.

Not a bad price for a gauge pod or something small like that.

[SIZE="1"]*Not including tax, shipping, handling, packing, processing, fuel charge, etc. [/SIZE]:D
tbirdregistry.com
26480
27373