2.3 questions February 20, 2010, 05:43:25 PM Which volvo head fits the 2.3 I was thinking about putting a turbo 2.3 into a daily driver 65 mustang and replace the straight 6 Quote Selected
2.3 questions Reply #1 – February 20, 2010, 10:03:32 PM none, if i think what your asking is in relation to this http://msvorinich.itgo.com/October_23.html it requires major worka shame as i wanted to do a NA motor someday but dont have the resources Quote Selected
2.3 questions Reply #2 – February 20, 2010, 10:11:11 PM use the search function, this was discussed a week or two or three ago. I think it was t3skidoo. that's doing the swap. Quote Selected
2.3 questions Reply #3 – February 20, 2010, 10:13:17 PM b234f is the DOHC people have used.i dont see why "major work" should equal an answer of "none" Quote Selected
2.3 questions Reply #4 – February 21, 2010, 06:55:43 PM Quote from: gumby;310900b234f is the DOHC people have used.i dont see why "major work" should equal an answer of "none"because when ever i find a post related to the subject of swapping a volvo dohc head onto a ford 2.3 lots of them are under the impression its a bolt on affair, which it is not. so the answer is then "none" are a bolt on, BUT can be made to fit with "major work".and major work is hard to sum up when major to some is just changing a fuel pump.see. Quote Selected
2.3 questions Reply #5 – February 22, 2010, 12:35:09 AM supercharged88, that sounds like a sweet plan. I've wanted to do the same to a 67 fb (my favorite pony).And not to be too pedantic, the head actually does bolt on. You just have to plug some other holes .. and stuff. :D Quote Selected
Topic: 2.3 questions (Read 784 times)
previous topic - next topic
