Skip to main content
Topic: what prop. valve (Read 1106 times) previous topic - next topic

what prop. valve

Which proportioning valve have you guys used and had good luck with?  Swapping to a TC 8.8 disc rear.

http://www.summitracing.com/parts/BAE-2000035/?image=large

http://www.summitracing.com/parts/FMS-M-2328-C/

What about these 2 ?

I guess this is the plug for the stock PV?  http://www.summitracing.com/parts/FMS-M-2450-A/

One more question.... where do you guys install the adj PV?  Can it be put by the passenger side hood hinge area like the mustangs?
Mike

 

what prop. valve

Reply #1
I have the second one on mine. You may want to try it without it. I know of 2 cars that didn't use it without issue. On mine I have it adjusted almost all the way out.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +