is this any good August 03, 2008, 10:38:55 PM http://cgi.ebay.com/ebaymotors/TURBO-RS-BOV-BLOW-OFF-VALVE-BOOST-CONTROLLER-30-PSI-WRX_W0QQcmdZViewItemQQcategoryZ33742QQihZ006QQitemZ160267887219QQrdZ1QQsspagenameZWDVW Quote Selected
is this any good Reply #1 – August 03, 2008, 10:41:10 PM the controller yes the BOV not for a stock t/c Quote Selected
is this any good Reply #2 – August 04, 2008, 12:02:23 AM Why pay the cash when you could make your own controller. Then I tell you to look into a Bypass valve instead. IF setup right the BPV will help you keep the turbo spooled up after shift. I know I told someone on here how to make a MBC for like $15. do some digging on the net that is where I found my info. If you run a BOV on a stock setup when the BOV opens it will let metered air out so you'll have a rich spike and I've heard about idle problems. You do what you want though. Quote Selected
is this any good Reply #3 – August 04, 2008, 04:42:07 PM that would have been me. i spent 8 bucks and have it boosted to 15PSI. thing is an animal. Quote Selected
in a word? Reply #4 – August 04, 2008, 04:56:57 PM no.no.way.If you want boost, just bypass the BCS with a length of vacuum line, more boost faster. Quote Selected
is this any good Reply #6 – August 04, 2008, 08:45:25 PM what is a bcs and ive lookked for info to make a boost controler but i haave no luck Quote Selected
is this any good Reply #7 – August 04, 2008, 10:47:56 PM That bell outlet on that BOV unscrews and you can stick a threaded piece of pipe on there and make it a BPV. Quote Selected
is this any good Reply #8 – August 04, 2008, 11:14:04 PM What quality of stuff do you think you're getting for a whole $18? Seriously. Quote Selected
Topic: is this any good (Read 1033 times)
previous topic - next topic
