Skip to main content
Topic: Boneyard run...TOMORROW MORNING !!! (Read 2584 times) previous topic - next topic

Boneyard run...TOMORROW MORNING !!!

Reply #15
87-88 FMS "Ducktail" spoiler.


I know its a very big stretch, but, hell, you may run across one!
88 TC, Lots of Mods.


Boneyard run...TOMORROW MORNING !!!

Reply #16
Vinnie -

The bracket that I'd PMed you about if you don't have one around (that will probably be a bitch to get off of a yard car) and more importantly the power steering pulley for my '85.  It's a CFI car that uses the weird 3-belt configuration.

Boneyard run...TOMORROW MORNING !!!

Reply #17
Quote from: cougarXLS;211973
vinnietbird,
If it's not too late to ask... I am looking for the light cover for the driver's side front fender running light. Shipping is negoitable if you will/could even ship it here. Let me know if it's possible, I could even purchase it off you at CatJam!
 
I've attached a picture, just for clarity's sake.
 
Thanks!


Vinnie,

And I need one on the passenger's side and the side molding behind the wheel.  Passenger's front fender molding both sides of the wheel

See pic http://www.foxtbirdcougarforums.com/showpost.php?p=207170&postcount=1

I found an antenna so strike that off the list. 

Thanks Vinnie,

Jeff

Boneyard run...TOMORROW MORNING !!!

Reply #18
Got it Xjeffs.If it's raining tomorrow,then the trip is postponed til Tuesday of next week.I'm playing it by ear right now.I'm hoping for no rain,though.I need stuff,too.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Boneyard run...TOMORROW MORNING !!!

Reply #19
Quote from: Dansbirds;211971
I know they are a tad large and shipping would be a bit but I really need to get some solid doors(87 Bird) Around here, western NY all I find are the same or worse than mine already.


Sent you a PM
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

Boneyard run...TOMORROW MORNING !!!

Reply #20
You got my PM pimp!
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Boneyard run...TOMORROW MORNING !!!

Reply #21
Why yes,yes I did.LOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Boneyard run...TOMORROW MORNING !!!

Reply #22
Postponed til next Monday."Orders" can still be taken until then.There's a monsoon here.LOL.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Boneyard run...TOMORROW MORNING !!!

Reply #23
Quote from: vinnietbird;212344
Postponed til next Monday."Orders" can still be taken until then.There's a monsoon here.LOL.


500 miles south, dry as a bone.  My grass is already dying.

Boneyard run...TOMORROW MORNING !!!

Reply #24
Today is beautiful.I'm getting ready to go out and work on "anything" for the Sport.Maybe the front replacement fender.we'll see.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Boneyard run...TOMORROW MORNING !!!

Reply #25
I need the center dash trim for a console car. Dont worry about it if its too much. on a really tight budget since i didnt get hours cause of easter.
1986 Cougar LS

Boneyard run...TOMORROW MORNING !!!

Reply #26
Quote from: cougar86_89;212838
I need the center dash trim for a console car. Dont worry about it if its too much. on a really tight budget since i didnt get hours cause of easter.

You are in the book.I believe I can get this pretty easy.....at a decent price.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Boneyard run...TOMORROW MORNING !!!

Reply #27
If I found your parts,you have been notified through PM.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Boneyard run...TOMORROW MORNING !!!

Reply #28
OH Yeah !!! If I contacted you,get with me so we can get it paid for and shipped.No backing out !!!
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

 

Boneyard run...TOMORROW MORNING !!!

Reply #29
PMed back!! Respond ASAP!! My moms waiting with an open pocketbook(nice that its my bday she shells out the big bucks)
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07