Skip to main content
Topic: Tbi To Fuel Injection (Read 750 times) previous topic - next topic

Tbi To Fuel Injection

So I Have A Freind With A 5.0 Tbi And He Wants To Know If He Can Convert Over To Fuel Injection .if He Would Only Need The Plentum Wiring Harnes And Computer Mabie Upgrade The Distrib ...what Would Be Involved And How Much Difrence Would It Make
[SIGPIC][/SIGPIC]

Tbi To Fuel Injection

Reply #1
Fuel lines,fuel rail.If you have a complete donor car,easy enough.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Tbi To Fuel Injection

Reply #2
He's already fuel injected,, :D CFI correct?:evilgrin:

he could try out the following
transfer everything from most any 86 and up 5.0 standard output system into his car.  that simple.

this should include
upper/lower intake
fuel rail system
TV/throttle cable system
harness
eec (investigate serial numbers last 3 digits for perfromance reasons)
fuel line system to transition into the newly obtained fuel rail system

 

Tbi To Fuel Injection

Reply #3
Be sure the engine/EEC harness will connect to the cars body harness... Ford has a knack of not making those a direct swap...