Well, I have lost it...looking into Aussie/US 200 I-6 swap

Topic: Well, I have lost it...looking into Aussie/US 200 I-6 swap (Read 7082 times) previous topic - next topic

Well, I have lost it...looking into Aussie/US 200 I-6 swap

Reply #30 – April 18, 2006, 09:33:41 PM

At long last!!!!

The rest of the parts finally showed up today...2 big boxes
Gotta love it..the box that had the head/rocker cover and a couple gaskets only weighed 60# :hick:

Here's a couple pics of the bulk of the parts

Covered in real Austrailian grime!!! It's amazing how light that head is.

Next is a better pic of the plenum and the fuel rail.

Check out the fittings on the fuel rail! No py quick disconnects!!

Once I get a free moment I'm going to get the head stripped down and get it cleaned up and see what I need to do about valve guides and seats, etc.

So finally after 6 months, the parts are here and once I get the 200 out of the Z-7 I can REALLY get into the conversion.

Well, I have lost it...looking into Aussie/US 200 I-6 swap

Reply #31 – April 18, 2006, 10:06:26 PM

HOLY that is one hell of a setup. usualy the i6 intakes iv seen look like a ported brick with a air filter on top of it... that looks all kinds of efficiant.

Well, I have lost it...looking into Aussie/US 200 I-6 swap

Reply #32 – April 18, 2006, 10:19:41 PM

You might be swaying me from my desire to use a 300.. :p

Eh, if I put the I6 plan in anything, it might be the Mark.. and I think I'd rather have the extra cubes. 250 at least.

Well, I have lost it...looking into Aussie/US 200 I-6 swap

Reply #33 – April 18, 2006, 10:23:27 PM

is that a scorpio in the background?

Well, I have lost it...looking into Aussie/US 200 I-6 swap

Reply #34 – April 18, 2006, 10:44:35 PM

Dayum, Chuck! That is cool! I can't wait to see the finished product. Be sure to keep us updated

Well, I have lost it...looking into Aussie/US 200 I-6 swap

Reply #35 – April 18, 2006, 10:55:18 PM

bad @$$

Well, I have lost it...looking into Aussie/US 200 I-6 swap

Reply #36 – April 18, 2006, 11:00:28 PM

Quote from: CougarSE

is that a scorpio in the background?

Yup :hick:

Well, I have lost it...looking into Aussie/US 200 I-6 swap

Reply #37 – April 18, 2006, 11:34:15 PM

thats about the same as the fuel injected intake for a 300. nice to see people that like the sixes. sounds like alot of work but it should be fun. are you going to turbo it or anything? a crossflow turbo 200 in a fox bird or cougar would be cool.

Well, I have lost it...looking into Aussie/US 200 I-6 swap

Reply #38 – April 18, 2006, 11:44:20 PM

Quote from: 84t-bird

are you going to turbo it or anything?

What do you think? :D

Well, I have lost it...looking into Aussie/US 200 I-6 swap

Reply #39 – April 19, 2006, 12:22:26 AM

I really like this. I kinda thought about beefing up the 200 that was in my Fairmont before we scored a built up 351C/C4 combo for $100.

Well, I have lost it...looking into Aussie/US 200 I-6 swap

Reply #40 – April 19, 2006, 12:26:25 AM

Quote from: Chuck W

Quote from: 84t-bird
are you going to turbo it or anything

What do you think? :D

my bad. i wasnt thinking when i asked that question. who wouldnt turbo an engine like that.

Well, I have lost it...looking into Aussie/US 200 I-6 swap

Reply #41 – April 19, 2006, 04:14:20 PM

I cant wait to see this in there, prolly be a year or two knowing chuck, but it will be cool

Been waiting forever for the twin sho topaz guy to update. Man I wanna see then

Well, I have lost it...looking into Aussie/US 200 I-6 swap

Reply #42 – January 06, 2008, 09:19:55 PM

OK, this has been on hiatus for long enough. SEVERAL things have been in the way of any forward progress but with the moving of the '83 to another storage location, I have my garage for the winter to work on a couple projects (well actually 3, but only one applies to this forum).

I finally began stripping down my US 200 longblock to get to the point of being able to do the block and head mods I need to do to make this happen.

Just for the pic ws I sat the Aussie head on the block just for grins.

I'll get the last of the external stuff stripped, then organize things a bit and start getting the internal bits apart.

Well, I have lost it...looking into Aussie/US 200 I-6 swap

Reply #43 – January 06, 2008, 09:55:50 PM

hooray, it LIVES!

Well, I have lost it...looking into Aussie/US 200 I-6 swap

Reply #44 – January 07, 2008, 01:04:17 PM

What bell housing will mate it to a T5? Is this the same setup that's on the Aussie DOHC 4.0L I6?