'85 AOD Crossmember Bushings Compatibility & Part Location

Topic: '85 AOD Crossmember Bushings Compatibility & Part Location (Read 1664 times) previous topic - next topic

'85 AOD Crossmember Bushings Compatibility & Part Location

February 02, 2018, 01:31:59 AM

I have a question concerning a 1985 TBird AOD cross-member bushings compatability. Will the Mustang bushings fit the Thunderbird for the same years? Also, where can these be located to purchase for the 1985 Thunderbird? Thanks. Images below are just examples downloaded from internet for this request.

'85 AOD Crossmember Bushings Compatibility & Part Location

Reply #1 – February 02, 2018, 04:28:41 AM

They are the same.

'85 AOD Crossmember Bushings Compatibility & Part Location

Reply #2 – February 05, 2018, 05:10:04 PM

You can use the double hump cross member out of a Fox Mustang in one of our cars so that should tell you what you need to know. Usually have to grind the tack welds on the tubes to the cross piece but that is all it takes. Energy Suspension makes them as well as the transmission to cross member mount.

http://www.energysuspensionparts.com/4.1102

http://www.energysuspensionparts.com/4.1104_v8

'85 AOD Crossmember Bushings Compatibility & Part Location

Reply #3 – February 06, 2018, 10:35:47 PM

Thanks folks. I ordered the Mustang poly updated ones prior to the question, but strangely auto-parts places never add the Thunderbird to the Mustang parts lineups and I wasn't sure the compatibility between the 2 cars. So, I guess I will just consider that my Thunderbird is just a Mustang wanabee under the body panels.

'85 AOD Crossmember Bushings Compatibility & Part Location

Reply #4 – February 07, 2018, 07:18:51 AM

Mustang with slightly longer wheel base basically. When I replaced my ujoints, I had to order then for a 2.3 n/a stang to get the right ones.

'85 AOD Crossmember Bushings Compatibility & Part Location

Reply #5 – February 07, 2018, 08:51:32 AM

Quote from: BradMph;464473

So, I guess I will just consider that my Thunderbird is just a Mustang wanabee under the body panels.

Yes, and no. There are differences, but some parts interchange.

Lots of discussions on these subjects around this forum.