Skip to main content ↑ ↓
Topic: h-pipe alignment help (Read 2463 times) previous topic - next topic

h-pipe alignment help

Reply #15 –
i reused only the tail pipes on my 88 LX, the factory T bird hangers at the ler are also very flimsy. i changed them over to mustan hangers.. those pipes liked to move under there on the stock hangers

h-pipe alignment help

Reply #16 –
Thanks guys for the ideas, I was going to heat and bend the hanger mount a bit, the trans mount is the one that was on there, I assume its factory mustang one, since 5 speed is out of a 94 stang.  It look in good shape so I keep it on. 

2 piece I guess you are talking about it coming apart at the H, yes it comes apart.  I cut about 1/2in off the side that slides into the other side.
It just does not clamp in like we are thinking, the tension on it keeps it from going that far close together.

Any pics of the others that have modified to make work?

h-pipe alignment help

Reply #17 –
I also used the summit off road H pipe with no fitting issues. The stinger tail pipes,gave me more problems.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

h-pipe alignment help

Reply #18 –
Okay after taking off and on the h-pipe like 15 times, I ended up bending the hanger a touch and tpuppies on the seat support bracket.  Thanks for the ideas again, I just try to do what I can before tpuppies anything, like to try and keep stuff like that in place, but hey the exhaust kit was a freebie and the car is defiantly not stock, lol.  Will post some pics of soon.

h-pipe alignment help

Reply #19 –
I did away with the H-Pipe hangers. After everything was bolted up, never had an issue without them. Glad yours is where you need it now.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

h-pipe alignment help

Reply #20 –
I run a BBK H-pipe.  Bolted right up with no issues. 

Quote
Okay after taking off and on the h-pipe like 15 times, I ended up bending the hanger a touch and tpuppies on the seat support bracket. Thanks for the ideas again, I just try to do what I can before tpuppies anything, like to try and keep stuff like that in place, but hey the exhaust kit was a freebie and the car is defiantly not stock, lol. Will post some pics of soon.

Glad you got it figured out.  Problems like these and figuring out ways to fix them is part of the fun working on cars!
'88 'bird, 10.9:1 306 w/TFS top end, forged rods/pistons, T-5 swap & bunch of other stuff, 1-family owned, had it since ‘98, 5.0tbrd88 on Instagram and YouTube
 

h-pipe alignment help

Reply #21 –
I had a BBK H on my old Sport and it went right in with no issues. I also, like Vinnie, did away with the H hangers, not because of fitment, but because I didn't have the bracket.
Currently Birdless but never Foxless

86 Mustang GT