Skip to main content ↑ ↓
Topic: 88 LX 302 differential FREE! (Read 472 times) previous topic - next topic

88 LX 302 differential FREE!

My car is in E.Texas and when I take the rear end out I will have no use for it. Free to anyone who wants it. It looks very good, not covered in oil/sludge. I assume it is a 7.5" not sure on that, but either way I wont need it. If someone wants to set up shipping, we can do that too. I get home later in the week.
1988 Thunderbird LX  557/C6 project. UPR tube K-member, A-Arms, Strange 10 way adjustable coilovers. SN-95 spindle,brakes. Manual rack, bump steer kit.  MM castor/camber plates, Dynatech 2 1/8 swap headers. Quick 9" 35 spline Moser axles,CHE lower c arms,

88 LX 302 differential FREE!

Reply #1 –
I wont need the stock k member, steering rack. I have two  10 hole rims on the back and I assume the 5 spoke stock rims on the front, I wont need either. Frt and rear coil springs. Anything I take off I will list it and give away. The frt struts appear to be fairly new. Blue Gabrial's?
1988 Thunderbird LX  557/C6 project. UPR tube K-member, A-Arms, Strange 10 way adjustable coilovers. SN-95 spindle,brakes. Manual rack, bump steer kit.  MM castor/camber plates, Dynatech 2 1/8 swap headers. Quick 9" 35 spline Moser axles,CHE lower c arms,

88 LX 302 differential FREE!

Reply #2 –
Driveshaft also. I realize most of this stuff isnt worth much or could be found locally, but throwing them out here anyway. I travel from Tennessee Colony Texas to New Orleans at least once a month, so I could help deliver to some point in between. All free.
1988 Thunderbird LX  557/C6 project. UPR tube K-member, A-Arms, Strange 10 way adjustable coilovers. SN-95 spindle,brakes. Manual rack, bump steer kit.  MM castor/camber plates, Dynatech 2 1/8 swap headers. Quick 9" 35 spline Moser axles,CHE lower c arms,

88 LX 302 differential FREE!

Reply #3 –
Very interested in the front struts
--Steve
[thread=28690]1988 Cougar V6[/thread]
2012 F-150 3.7L
2011 Mustang 3.7L

88 LX 302 differential FREE!

Reply #4 –
I am offs right now, I can remove them and I go to New Orleans every month and can ship them from there to save you shipping costs. They look like they are not very old at all.
1988 Thunderbird LX  557/C6 project. UPR tube K-member, A-Arms, Strange 10 way adjustable coilovers. SN-95 spindle,brakes. Manual rack, bump steer kit.  MM castor/camber plates, Dynatech 2 1/8 swap headers. Quick 9" 35 spline Moser axles,CHE lower c arms,

88 LX 302 differential FREE!

Reply #5 –
Whatever's more convenient for you. I have no complaints about shipping costs on free parts:D
--Steve
[thread=28690]1988 Cougar V6[/thread]
2012 F-150 3.7L
2011 Mustang 3.7L

88 LX 302 differential FREE!

Reply #6 –
If you pm me your shipping info and phone # that would be cool. I should get off of this rig any day now. I'll pm mine,although I have no cell signal out here.
1988 Thunderbird LX  557/C6 project. UPR tube K-member, A-Arms, Strange 10 way adjustable coilovers. SN-95 spindle,brakes. Manual rack, bump steer kit.  MM castor/camber plates, Dynatech 2 1/8 swap headers. Quick 9" 35 spline Moser axles,CHE lower c arms,