Skip to main content ↑ ↓
Topic: Turbo Ford 2.3 Skull style T Shirts (Read 667 times) previous topic - next topic

Turbo Ford 2.3 Skull style T Shirts

I teamed up with Gear Head Clothing to create a specific Skull T shirt for the Turbo Ford 2.3 club.  I decided to go this route because he needs at least 20 shirts created, in order to be cost effective. He needs a large enough order to create screen and make a large enough order that the cost savings is past on to us here.They will only come in black with white print because being the fact that we here are all gearheads, its the best way to hide dirt. LOL!! I decided to go this route because he needs at least 20 shirts to be cost effective to create screen and make a large enough order that the cost savings is past on to us here.

This is the logo (But it will say Ford Turbo Club)
http://i158.photobucket.com/albums/t97/biggrgivens/skulllogobestcopy.jpg

This is the shirt
http://i158.photobucket.com/albums/t97/biggrgivens/skullshirt.jpg


S-XL are $18. plus shipping
XXL-XXXXL are $20. plus shipping

Shipping will be $7 shipped usps priority flat rate envelope with insurance

You can order directly from me or gear heads on turboford, but let him know you saw the add here and a $1 will go towards a donation to this site per shirt. (More than the requested 5%)

My paypal is biggrgivens@hotmail.com. Please list size and what you are purchasing. Once we have a complete order of 20. I will let you guys know. Thanks
Motorsport FMIC, Boport 1.5, Boblee header, gutted upper, profiled lower, phenolic spacer, Accufab fpr, LA3, Boport stage 3 big valve head, 57 trim/stage III Perfromance Techniques custom turbo, stinger 3" DP and custom 3"exhaust, AEM wideband, custom aluminum carnk pulley, Merkur custom A/C setup, PA performance high output 3G alt, dual oil catcj cans, Motorsport Valve cover,full Motorcraft tune up kit, 22psi of LOCO!!

Turbo Ford 2.3 Skull style T Shirts

Reply #1 –
I might have to pull the 351w back out and put the 2.3 back in so I can wear one of those shirt's
[SIGPIC][/SIGPIC]:ford:87 Turbo Coupe through the floor sub frame connectors, 5.8 swap Ford racing heads Harland sharp 1.6 rockers BBK shorty swap headers 2 1/2 BBk X pipe magnaflow ler's. Megasquirt 2 with 36lbs injectors on hurricane intake with 4150 throttle body.Tremec TKO 600 Quicktime blowsheild spec stage 3 clutch. 3.73 gears and still not done

Turbo Ford 2.3 Skull style T Shirts

Reply #2 –
9 shirts orderd so far:)
Motorsport FMIC, Boport 1.5, Boblee header, gutted upper, profiled lower, phenolic spacer, Accufab fpr, LA3, Boport stage 3 big valve head, 57 trim/stage III Perfromance Techniques custom turbo, stinger 3" DP and custom 3"exhaust, AEM wideband, custom aluminum carnk pulley, Merkur custom A/C setup, PA performance high output 3G alt, dual oil catcj cans, Motorsport Valve cover,full Motorcraft tune up kit, 22psi of LOCO!!

Turbo Ford 2.3 Skull style T Shirts

Reply #3 –
i was reading the thread on these over on nato.. i'll definitely be ordering at least 1 next week
ShadowMSC.com < < Still Under Construction

R.I.P. 'Zump' 8/29/86 - 11/11/11
3- 87 TC's / 1 really mean 83 Capri RS / 94 Sonoma SAS Project on 37x12.50 TSL Radials / 88 S10 that's LITERALLY cut to pieces / 84 F150 SAS, 351M, 39.5 TSL's / 85 Toyota regular cab, 22R 5spd, 3/4" drop, my little junkyard save/daily driver