Skip to main content
Topic: Pics of my new daily driver...85 Cougar! (Read 11271 times) previous topic - next topic

Pics of my new daily driver...85 Cougar!

Reply #46
That is one nice cat!
Matt
1984 Thunderbird - 89 302 HO, GT40 heads w/ Trick Flow springs, E303 cam, Edelbrock Performer 289 intake and 600 cfm 4bbl, Mustang headers, Jegs o/r H pipe, Dynomax lers, Mustang AOD and shifter, Mustang 8.8 w/ 3.73s, 3G alternator, Mustang front and rear sway bars, KYB 87-88 Turbo Coupe shocks and struts, and 11" front brakes.

1988 Mustang GT - GT40 heads, Explorer intake, 70mm throttle body, 70mm MAF, Crane 1.7 rrs, E303 cam, Kirban Kwik shifter w/ Pro 5.0 deluxe handle, aluminum clutch quadrant and firewall adjuster, o/r h pipe, Dynomax lers, 3G alternator, aluminum radiator, and 3.27 gears.
 
1986 Cougar 5.0, 1989 Mark VII LSC 5 speed, 1980 Mercury Zephyr 4 door (sold)

Pics of my new daily driver...85 Cougar!

Reply #47
just use a cutoff wheel and grind the heads off, till the bolt drops
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

Pics of my new daily driver...85 Cougar!

Reply #48
if you already got the bolts off.... ignore that post
My browser only lets me see the 1st page of threads sometimes until I post something
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

Pics of my new daily driver...85 Cougar!

Reply #49
nice and clean :)

Pics of my new daily driver...85 Cougar!

Reply #50
Wow, that is a gorgeous kitty cat!  you never see 'em like that anymore.  I would keep that baby stock as possible, but thats just me :D
[SIGPIC][/SIGPIC]

My Bebe! 1980 Thunderbird, 302 & AOD are the only option boxes checked

Pics of my new daily driver...85 Cougar!

Reply #51
Bummer, I lost a hubcap today.  I went back and picked it up but it was broken.  Good thing we have a set of 10 holes to go on it in the near future.
1986 Mercury Cougar - 2.3T/T5 swap, TC brakes and suspension and rearend, 3" exhaust, 255 lph fuel pump, Stinger BOV, Gillis MBC @ 18 psi
2003 Chevy Suburban Z71 - Daily driver
2015 Chevy Volt - Wife's daily driver

Pics of my new daily driver...85 Cougar!

Reply #52
I put new shocks and struts on this weekend.  The old ones were completely wasted.  The car rides sooooo much better now, which is good because the roads are in considerably worse shape here than they were in Vegas.  I also put in new wheel bearings and fixed a small coolant leak while i was at it.
1986 Mercury Cougar - 2.3T/T5 swap, TC brakes and suspension and rearend, 3" exhaust, 255 lph fuel pump, Stinger BOV, Gillis MBC @ 18 psi
2003 Chevy Suburban Z71 - Daily driver
2015 Chevy Volt - Wife's daily driver