Skip to main content ↑ ↓
Topic: FINISHED...Console control panel..... (Read 4758 times) previous topic - next topic

FINISHED...Console control panel.....

Reply #15 –
Quote from: vinnietbird;328068
I think I could do it for about $30.00,which,would be the black panel,and the aluminum insert.If you send only the aluminum insert panel,then $25.00 which would include the return shipping.Probably a 2 to 4 day turn around depending on what's going on around here.


Would you be willing to sell the decals/stickers you used?

Shiny Side Up!
Bill
"as if 'religion' were something God invented, and not His statement to us of certain quite unalterable facts about His own nature." -C.S. Lewis

FINISHED...Console control panel.....

Reply #16 –
Sure.I'll get a price tomorrow.I'll also go ahead and have them printed up.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

FINISHED...Console control panel.....

Reply #17 –
What color did you paint the plastic of the panel (ie not where the decals go)? I'm trying to reproduce the factory gray on the little door for the ash tray. Mine has a few chips and I'd like to repaint it.
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

FINISHED...Console control panel.....

Reply #18 –
I painted the whole panel and the door as one assembly.Mine was closer to black.I sanded the ashtray,used rubbing alcohol to clean the plastic REALLY good,and shot it with Duplicolor flat black wheel paint.It didn't end up "flat black",more of a mild satin finish,and it's very resistant to chipping,chemicals,and anything else.It looks great,and that's what I'll be using to restore the two panels in the garage.I also used a quality primer/sealer on everything.Prep is the important part...and proper decal placement...and the paint/clear application....and the whole process.LOL.I'm really pleased.Rarely do I impress myself,but this was one of those times.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

FINISHED...Console control panel.....

Reply #19 –
Nice job Vin...I kinda like it without the stripes too
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

FINISHED...Console control panel.....

Reply #20 –
Jerry,that would go with our "Long Distance Free Trade Agreement" if you need it done.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

FINISHED...Console control panel.....

Reply #21 –
Quote from: vinnietbird;328075
Sure.I'll get a price tomorrow.I'll also go ahead and have them printed up.


Cool.... let me know and I'll send ya the money!

Shiny Side Up!
Bill
"as if 'religion' were something God invented, and not His statement to us of certain quite unalterable facts about His own nature." -C.S. Lewis

FINISHED...Console control panel.....

Reply #22 –
Quote from: vinnietbird;328103
Jerry,that would go with our "Long Distance Free Trade Agreement" if you need it done.


I'll let you know. That would be the last thing that I would need to worry about. I may need some other stuff for under my car though.
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

FINISHED...Console control panel.....

Reply #23 –
I'm still trying to get to the yard.It rained yesterday on my day off,and today and the rest of the week.....Hellaciously hot !!!
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

FINISHED...Console control panel.....

Reply #24 –
thats darn good work man!

I like it

FINISHED...Console control panel.....

Reply #25 –
That looks awesome... I'll take a single seat one if you make them mine looks like trash the letters all came off and I just painted it black but paint is all bubbled up now due to the heat,
:ford::oldcougar::mercury:

FINISHED...Console control panel.....

Reply #26 –
I'll be starting a single seat version in a day or so.I'll send you a pic and let you decide if it's good enough for you.I think You'll like it.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

FINISHED...Console control panel.....

Reply #27 –
Quote from: vinnietbird;328293
I'll be starting a single seat version in a day or so.I'll send you a pic and let you decide if it's good enough for you.I think You'll like it.


Oh im sure I will I will send you a picture of mine and let you see how much better just about anything would be.. :D
:ford::oldcougar::mercury:

FINISHED...Console control panel.....

Reply #28 –
I just took a "before" pic.I'll take an "after" pic when it's done and post them together.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

FINISHED...Console control panel.....

Reply #29 –
hell i could use one for the single seat. but im going to wait to do it when i do the 351 build.
2001 Buick Regal LS (DD):hick:

Got that fox rash again!

-Resident smartass! :ies:

- Don't listen to the naysayers. For every person who actually helps with your project there will be 10 who will discourage you all the while thinking that they are helping. 99% of all people have good intentions. That doesn't make them right.- XR7 Dave - SCCOA.Com