Skip to main content ↑ ↓
Topic: Removing Rear Window Molding on an 88 (Read 1484 times) previous topic - next topic

Removing Rear Window Molding on an 88

Hey guys, I just recently got stationed back in the States after a couple of years in puppiesan. I bought a 88 TC just before leaving the States and it has been in storage waiting a resto. So now I'm in my new house, garage is set up , and the fun can begin!

So my 1st question:

Is there a write up on how to remove the plastic/rubber one piece rear window molding on an 88 TC? I searched and can't find a good description and I don't have the factory manuals any more. My molding is cracked so I wanted to try and repair it off the body.

Here's are some pics:
 

By the way, it's great to be back home and in the Turbocoupe Community again!!  Cheers!

Removing Rear Window Molding on an 88

Reply #1 –
Welcome home !!


 There is no special trick for the molding, it just pulls out of the channel,
get a screwdriver or something similar under it and gently pry it up:D
Fox-less at the moment

Removing Rear Window Molding on an 88

Reply #2 –
There's an NOS rear window trim piece in the classifieds for sale...$120.00...Sounds kind of high,but,they are hard to find and it's probably worth it.Spend the money now and have it.Better than waiting and not being able to find one.That piece can really ugly up a nice car.

Welcome home.I remember coming home from over seas many times. Good luck with the Bird,and,pics are needed asap.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Removing Rear Window Molding on an 88

Reply #3 –
http://www.foxtbirdcougarforums.com/showthread.php?t=28298
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..