Skip to main content
Topic: Help Me Pick Out Plates! (Read 3098 times) previous topic - next topic

Help Me Pick Out Plates!

Reply #15
Ibite

Help Me Pick Out Plates!

Reply #16
Hmm... I like a lot of those.  I've been checking availabilities of them all day, here's my top ones at this point (every variation of "Snake Bit" is already taken):

1. VNMUSSS
2. HAS BITE
3. BIT YA
4. HISS 96
5. LS1 WHO

Any opinions?

Help Me Pick Out Plates!

Reply #17
Ponyvenom
Ponybite
Snakehoof

Help Me Pick Out Plates!

Reply #18
HOKRPNY ?

Wait, wait, you aren't DVP....that would be fine for his SHO...j/k....
1985 Mercury Cougar V6
1989 F-200 V8
1996 Explorer V6
2001 F-150

Help Me Pick Out Plates!

Reply #19
definitely vulgar:
one eye
1 eye
trouser
trousr
pants

maybe vulgar:
boa boy
side windr

strictly animal (maybe):
krait
coral
red rat
__________________
Twin '85 TCs
White/ Grey 2-tone
#1 (left): undergoing top-to-bottom rebuild     
#2 (right): DD, power everything (sorta)
[SIGPIC][/SIGPIC]

Help Me Pick Out Plates!

Reply #20
Quote from: MexCougar;251591
HOKRPNY ?

Wait, wait, you aren't DVP....that would be fine for his SHO...j/k....


haha thats funny.

Help Me Pick Out Plates!

Reply #21
in memorium:
no bird
birdless
__________________
Twin '85 TCs
White/ Grey 2-tone
#1 (left): undergoing top-to-bottom rebuild     
#2 (right): DD, power everything (sorta)
[SIGPIC][/SIGPIC]

Help Me Pick Out Plates!

Reply #22
On my daughter's 96 Fobra, she went with:

MY96KIX

For something that can back it up, I kind of like:

SEE YA

or

UD LOSE
1987 Turbo Coupe - Son's car
1987 Super Coupe - Son's project car
1934 Ford - My project car


Help Me Pick Out Plates!

Reply #24
Mysnake
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Help Me Pick Out Plates!

Reply #25
pedal PW

MESLOW

u slow

u again

1 2race

egotime

nicecar

uthink?

my ride

try me

PD2MUCH

i used the last one on my race car.
remember it easier to fix them, than to find them after they been crushed.

V6 = juvenile delinquency!

Help Me Pick Out Plates!

Reply #26
Hmmmm...

GO GONE

IAM 1ST

SMOKED

KTCH ME

U LOSE

U LOST

SEE YA

MY HOSS

SNAP CU

UR SLOW

IM FAST

BEAT CHA

BURNT U

WAZ DAT

11 QTR
[SIGPIC][/SIGPIC]1987 Turbo Coupe
LenTech Strip Terminator Valve Body AOD, 302 Stroker (cid 347) 10:1 Compresion
Ford Racing Cast 3.40 Crank Balanced, Pioneer Forged 5.4 Rods, Mahle Flat Top Pistons 4.40, Edelbrock Performer RPM Alluminum Heads
Ford Racing 220 Duration 500 Lift Cam, Edelbrock Performer Intake Manifold , Edelbrock 800 cfm Performer Carb
Flowtech Headers, KYB Adjustable Shocks, Dyna Max Exhaust
355 Posi Rearend

Help Me Pick Out Plates!

Reply #27
Hemi KLR.    :burnout:
95 Ranger Splash 2.3
88 Tbird Sport :ies::ies:
5.0 SO, stainless shorty headers, w/ Magnaflow lers. KYB struts, KYB shocks. 5lug conversion from sn95 Mustang, subframe connectors, drilled and slotted rotors, 03 Mach 1 wheels. sequential taillights.140 speedo

Help Me Pick Out Plates!

Reply #28
FOMOCO1
Fordpwr
ybuygm

the one for my car hopefully will be: 1badcat
'83 Cougar *the never ending project* warmed over 306 v8,c4,8.8 posi with 5 lug conversion
'91 mustang strictly street-in progress
'00 f150 7700-Mean Green: jet stage 1 chip,ported upper intake with 1" spacer,'04 Super Duty intake with injectors,summit racing short tube headers with true 2.5" duals with smithy's glasspacks!

Help Me Pick Out Plates!

Reply #29
Quote from: EricCoolCats;251623
My favorite of all time:

That's good...

Two of my favorites were TOW END on a Renault Alliance and LUXURY on a ratty Chevette... A Personalized plate is only $10 in VA, so probably 10-15% of the cars have PPs... Makes it hard to get a good one, as most are taken...

The ones that say NV MY(whatever) makes me want to throw a rock at them...