Skip to main content ↑ ↓
Topic: 88 TC for parts. (Read 2234 times) previous topic - next topic

88 TC for parts.

Reply #15 –
what do you want for the horn button thanks, todd

88 TC for parts.

Reply #16 –
Quote from: toddp;238771
what do you want for the horn button thanks, todd

Its sold.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

88 TC for parts.

Reply #17 –
Money coming asap.My funds should be here today.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

88 TC for parts.

Reply #18 –
Pmed ya about the following:

Stereo Surround Molding
Dash surround molding
system century w/ lighter
Steering colum molding - 3 pieces
Turn signal lever
Wiper lever
Seat belts next to seats.

thanks!!!
===85BIRD===
:birdsmily:

88 TC for parts.

Reply #19 –
can you send pics of the bottom of the doors on the seem to jpc647@charter.net?

88 TC for parts.

Reply #20 –
Quote from: jpc647;239969
can you send pics of the bottom of the doors on the seem to jpc647@charter.net?

In a couple of days, I'll send them.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

88 TC for parts.

Reply #21 –
Ok, the following I could use:

Complete door panels,(for both doors) arm rests, speaker covers and whatever you call the bin at the bottom of the door. 

Parking light cover, Headlight cover and blinker covers both sets (driver and passenger)

Dash cap if it's not cracked.

Driver's side kick panel ( I busted the emergency brake mount off from there)

Passenger side window (if it can be shipped safely).

Drivers side window slides (the little plastic piece the window sits in)

My tailight covers are scratched up, if yours are in great shape, I could use them to.

That should do it for now, if I think of anything else I'll let you know.
[SIGPIC][/SIGPIC]1987 Turbo Coupe
LenTech Strip Terminator Valve Body AOD, 302 Stroker (cid 347) 10:1 Compresion
Ford Racing Cast 3.40 Crank Balanced, Pioneer Forged 5.4 Rods, Mahle Flat Top Pistons 4.40, Edelbrock Performer RPM Alluminum Heads
Ford Racing 220 Duration 500 Lift Cam, Edelbrock Performer Intake Manifold , Edelbrock 800 cfm Performer Carb
Flowtech Headers, KYB Adjustable Shocks, Dyna Max Exhaust
355 Posi Rearend

88 TC for parts.

Reply #22 –
Hi I would like to buy the following if still available.

*center consold arm rest pade
*equalerizer and factory amp in trunk

Please email me at 1mwitkowski@comcast.net to let me
know.

Thanks

Mark W

88 TC for parts.

Reply #23 –
How much for the computer, BAP sensor, downpipe, and a complete throttle body?
85 Tbird 5.0
78 F150 351w
13 F150 4x4 3.5 Ecoboost

88 TC for parts.

Reply #24 –
I know some one asked about the spoiler....But if the deal fell through I live in NJ and would pick it up.

Please let me know.  If I was to come to PA for the spoiler ,I might want to get afew other larger parts (hood, seats)

Thanks again.

Mark W.
1mwitkowski@comcast.net

88 TC for parts.

Reply #25 –
The spoiler is still here,and the other parts you asked about,except the console lid.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

88 TC for parts.

Reply #26 –
Quote from: 88FoxBird;240220
How much for the computer, BAP sensor, downpipe, and a complete throttle body?

 
Pm'd you.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

88 TC for parts.

Reply #27 –
Quote from: CustomT;240194
Ok, the following I could use:
 
Complete door panels,(for both doors) arm rests, speaker covers and whatever you call the bin at the bottom of the door.
 
Parking light cover, Headlight cover and blinker covers both sets (driver and passenger)
 
Dash cap if it's not cracked.
 
Driver's side kick panel ( I busted the emergency brake mount off from there)
 
Passenger side window (if it can be shipped safely
 
Drivers side window slides (the little plastic piece the window sits in)
 
My tailight covers are scratched up, if yours are in great shape, I could use them to.
 
That should do it for now, if I think of anything else I'll let you know.

Pm'd you.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +

88 TC for parts.

Reply #28 –
I pm'd you.

88 TC for parts.

Reply #29 –
Quote from: mwitkowski;240721
I pm'd you.

I emailed you call me.
Old Grey Cat to this.88 Cat, 5.0 HO, CW mounts, mass air, CI custom cam, afr165's, Tmoss worked cobra intake, BBK shorty's,off road h pipe, magnaflow ex. T-5,spec stage 2 clutch, 8.8 373 TC trac loc, che ajustables with bullits on the rear. 11" brakes up front. +