Skip to main content
Topic: Finally went to the track (Read 1578 times) previous topic - next topic

Finally went to the track

Well went to the track saturday to see what the cougar had. Well the old motor has 195262 miles on it at the time of the race. I have put in a new tranny that is slightly upgraded, a rear shock tower brace, and a strut tower brace. The only other upgrade would be a tune up with better coil and plug wires. Was able to make three passes during time trials first was a 12.13, next was 12.36, then a 12.09. I did my dial in at 12.07 and broke out with a 11.93. This was an 1/8th mile track. However I was not the slowest entry of the day. There was a dodge diesel 6-speed crew cab that ran 12.65. Reckon I got long way to improve lol. Anyhow it didnt go home on a trailer and still took girlfriend to work on Monday. Dont laugh too much I plan on continuing to work on the car. Thanks for listening.
MAKE IT TAKE IT
"ELEANOR" 1988 :cougarsmily: :burnout: 5.0L, IGNITION UPGRADE, STRUT TOWER BRACE, SHOCK TOWER BRACE, ROAD RIPPER 1000 AOD, STILL TINKERING

"MUDSLUT' 1993 F-150 SUPERCAB FLARESIDE 4X4: STOCK 5.0L, ROAD RIPPER 3000 E4OD, 4.56 gears, Detroit locker rear, Posi-Lok limited slip front, 35X12.50R15 Dick Cepek Crushers, more to come

Finally went to the track

Reply #1
Ya gotta start somewhere... But it should run better than high 11's..

My '93 Grand Marquis(4.6) will run high 10's...

Finally went to the track

Reply #2
i agree it should but and probably will the next time out when i actually get to plan it instead of driving by and deciding to try it rite then so i will have my truck with on board air and stuff to adjust air pressure and get my chargin problem fixed so that it aint idling all day either lol oooooops it happens
MAKE IT TAKE IT
"ELEANOR" 1988 :cougarsmily: :burnout: 5.0L, IGNITION UPGRADE, STRUT TOWER BRACE, SHOCK TOWER BRACE, ROAD RIPPER 1000 AOD, STILL TINKERING

"MUDSLUT' 1993 F-150 SUPERCAB FLARESIDE 4X4: STOCK 5.0L, ROAD RIPPER 3000 E4OD, 4.56 gears, Detroit locker rear, Posi-Lok limited slip front, 35X12.50R15 Dick Cepek Crushers, more to come