Skip to main content
Topic: need engine computer (Read 326 times) previous topic - next topic

need engine computer

have a 1988 mark 7 ,looking for an  engine computer (E9SF 12A650 SA).

need engine computer

Reply #1
I don't have that one,but I have two DA-1 Mustang computers which will work just as good or better.The Stang computers I was told don't have the speed limiter that the Mark VII has.$35.00 shipped in the lower 48.PM me if you're interested.It's a direct swap.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..


need engine computer

Reply #3
Quote from: vinnietbird;225263
I don't have that one,but I have two DA-1 Mustang computers which will work just as good or better.The Stang computers I was told don't have the speed limiter that the Mark VII has.$35.00 shipped in the lower 48.PM me if you're interested.It's a direct swap.


That speed limiter used to kill me after I got the 3.73's in the old car and couldn't get a proper AOD speedo gear....poppin off the limiter the whole way down the high-way...lol.
Project 3G: Grandpa Grocery Getter-'85 Crown Vic LTD 2-door, 351W with heavily ported/polished GT40 heads, heavily ported/polished Typhoon Power Plus upper & lower intake, Comp Cams 265DEH retarded 1*, FAST EZ-EFI, HD T5, 8.8" 3.73 trac lock with extra clutches, 3G alt. swap, '99 CVPI front brakes, '09 CVPI rear disc brakes, '00 CVPI booster&m/c + wilwood adj prop valve.

Parted & Gone-'88 T-bird Sport, 351W swap, ported GT40 heads