Skip to main content ↑ ↓
Topic: Project Evolution *** Project Complete **** Wednesday July 9, 2014 (Read 1171026 times) previous topic - next topic

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #90 –
Hey, if you ever need help with anything, this is the place to be.
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #91 –
Today I got home, and seeing that it was a such a nice day, I figured I could finish the drivers side floor.

I'll skip right to good stuff.
this is where I left off a few weeks ago


Heres the finished product




Its not as pretty as I hoped, It looks a lot better from underneath.
Next on the list is a little repairing by the rear wheelwells.
I'm also going to open up the floor between the rear frame and treat any rust.
It's starting to look like a floor.
2 more hrs today
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #92 –
Nice!! Did better then me today! I only got half my h pipe fixed and reinstalled!
RIP 1988 and 1990 Lincoln Mark VII LSC
I welcomed the dark side and currently am driving a 2000 Dodge Durango SLT plus, with a 5.9, Code named project "Night Runner"
Shes black on black, fully loaded, with headers, 180 tstat, e fan, straight exhaust into a cherry bomb vortex ler, full tune up, ported intake and T/B, MSD coil, and round aircleaner.
Mods to come: Fully rebuilt and heavily modded 46RE, and a richmond rachet locker.
my $300 beater ;)
R.I.P Kayleigh Raposa 12/18/90 - 2/24/07

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #93 –
you go man...............awesome work you are doing.:bowdown:
Never drive faster than your guardian angel can fly.
:birdsmily: :birdsmily: :birdsmily::birdsmily: 
  [SIGPIC][/SIGPIC]
:birdsmily: :birdsmily: :birdsmily::birdsmily:
1983 base model,1969 302 (originally a v6),upraded c5,currently 30,441 original miles.

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #94 –
Looks BETTER from underneath? Better than that? Wow. I'd love to see it because that looks awesome. Especially considering the sound mat and carpet will be over it, the attention to detail you've given that is remarkable.
 
Unbelievable.
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #95 –
Lol

I guess it's better then the first pic


The problem with this side, was I didn't have anything to work from.
I really didn't know what it was supposed to look like.
the other side will be easier
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #96 –
Right riiiight I gotcha now. Yeah they gotta put all these weird patterns into the pan! Ugh couldnt it just be a flat plane? :hick:
 
So when do you think you'll have it done and ready to go? That would be sick if you could cruise around in the summer and bring it to cruise nites with a bigass photo album showin off all the hard work. :cool: :cool: :cool: :cool:
1987 20th Anniversary Cougar, 302 "5.0" GT-40 heads (F3ZE '93 Cobra) and TMoss Ported H.O. intake, H.O. camshaft
2.5" Duals, no cats, Flowmaster 40s, Richmond 3.73s w/ Trac-Lok, maxed out Baumann shift kit, 3000 RPM Dirty Dog non-lock TC
Aside from the Mustang crinkle headers, still looks like it's only 150 HP...
1988 Black XR7 Trick Flow top end, Tremec 3550
1988 Black XR7 Procharger P600B intercooled, Edelbrock Performer non-RPM heads, GT40 intake AOD, 13 PSI @5000 RPM. 93 octane

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #97 –
Now that the weather is getting warmer and the days are longer, I could work a couple hrs every day or so. I figure now that there's more time to work on it. I should be doing exterior body work on it at the end of june, beginning of july. The motor still needs to be pulled, and the engine compartment needs to be redone.

I'm not going to try to rush it. It takes as long as it takes sometimes
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #98 –
That's amazing stuff. Makes me wanna go check it out in person hah.

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #99 –
Quote from: baxo;213212
That's amazing stuff. Makes me wanna go check it out in person hah.


Let me know, your just right around the corner from me.
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #100 –
hah exaclty, I was right along the border even tonight, Took a nice stroll down by the gorge in Niagara On the Lake with my gf.

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #101 –
let me know when your in the area next time
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #102 –
I decided to cut open the rear frame to see how bad it was inside.
the same amount that was in the front.


While I had it open, I coated it with encapsulator


Cut a new piece to cover it up.


Welded it on


I still have a little more to fix in this area.
4 more hrs today.
43-1/2 total, with yesterdays 2
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #103 –
Hey, Jerry do you ever feel like the (Energizer Bunny) because this project just keeps going going going....and it's also keeping us more anxious to see what the final outcome will look like. Just keep the pics a coming. lol :headbang: :grinno:

Project Evolution *** Project Complete **** Wednesday July 9, 2014

Reply #104 –
Todays project,
Finish up the rest of the drivers side floor.


Last of the drivers side patching.
there was a couple small holes around the wheelwell, so I patched the entire thing for reinforcement.
Boy I love those hard drive magnets.


I remember taking more pics but there were only 2 on the camera when I uploaded them. (strange)
So here's the finished product.


1-1/2 hrs today
I only started 2 fires today. I forgot about the undercoating. lol
Until tomorrow
.
.
.
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook
http://www.facebook.com/home.php?sk=group_137541156293768&ap=1