Skip to main content

Poll

What colours?

Total Members Voted: 35

Topic: The upcoming Thunder Chicken repaint (Read 2993 times) previous topic - next topic

The upcoming Thunder Chicken repaint

Reply #15
30th Anny TBirds and certain 85 and 86 color TC's had painted moldings. Not to mention GT Mustangs...

And as for the "pants" look... the blue stripe is on the bottom of the moldings, not the top. Redraw it and it will look different.

The upcoming Thunder Chicken repaint

Reply #16
Quote
Show me the "anti alias" filter in MS Paint and I'd be happy to :flip:

Ya cheap ! Still using the software that came with the freakin' computer...*sigh* Spend $100 and get this already. Sheesh. :flip:

I guess if you want to figure out about the painted moldings (or not), a 1990-ish blue Mustang GT like this one is sort of set up like that: painted molding with a blue inset stripe. Since the top of the molding is just about halfway between the glass and the bottom of the car, the look would definitely balance out...I don't think it would be too much grey at all. Hell, I even went above the molding in the back of the car and it still balances out fine. It's not that the stock black molding is bad...it's just that the painted molding makes these cars stand out above everyone else. It's a very striking image that everyone remembers.

Unless you enjoy being a lemming, and looking just like everyone else... ;)

The upcoming Thunder Chicken repaint

Reply #17
I think the whole car, minus the fact that it has snowflakes and it's not the look your going for, will look something like mine. Mine has the factory 84 back with no stripe, with the same color undermolding.

The upcoming Thunder Chicken repaint

Reply #18
I actually think the window trim would look good grey. Not a light grey but dark, almost black but not quite. I think you're rendering there isn't dark enough and that's why it may look a little iffy. :dunno:

The upcoming Thunder Chicken repaint

Reply #19
Quote from: Aerobird Motorsports;130547
30th Anny TBirds and certain 85 and 86 color TC's had painted moldings. Not to mention GT Mustangs...

Quote from: EricCoolCats;130549
Ya cheap ! Still using the software that came with the freakin' computer...*sigh* Spend $100 and get this already. Sheesh. :flip:

I guess if you want to figure out about the painted moldings (or not), a 1990-ish blue Mustang GT like this one is sort of set up like that: painted molding with a blue inset stripe. Since the top of the molding is just about halfway between the glass and the bottom of the car, the look would definitely balance out...I don't think it would be too much grey at all. Hell, I even went above the molding in the back of the car and it still balances out fine. It's not that the stock black molding is bad...it's just that the painted molding makes these cars stand out above everyone else. It's a very striking image that everyone remembers.

Unless you enjoy being a lemming, and looking just like everyone else... ;)

Ok, so I got one guy telling me to paint my mouldings like a Mustang (the original lemmingmobile), and another telling me that if I DON'T I'll be like a lemming. You guys are so confusing :shakeass:

I dunno - that Mustang does look good, and I really like the mouldings painted grey on Gunkel's car. Maybe I will do it like that. I suppose I do have a complete set of TC mouldings, so if I decide I don't like it I can always, to quote Mick Jagger, "paint it black"...

Oh, and Eric - it's not a matter of cheapness (Silly Mac boy - nobody actually pays for Windows software), it's a matter of familiarity. I've been using MS paint since 1990. It does the trick for simple line drawings as above. Whenever I want to do something more elabourate (or even something simple like resizing and changing compression levels) I have Paint Shop Pro 7. I rarely, however, have to do something more elabourate :hick:

*EDIT* Oh, and Michael - I'll be ordering some of that blue trim striping from you eventually - I'll also be pestering the hell out of you with stupd questions like "How do I remove the old chrome stuff" and "how do I get this shiznit off the bumpers"...
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣

The upcoming Thunder Chicken repaint

Reply #20
Black molding and blue stripe looks good to me.
88 Thunderbird LX: 306, Edelbrock Performer heads, Comp 266HR cam, Edelbrock Performer RPM intake, bunch of other stuff.

The upcoming Thunder Chicken repaint

Reply #21
Looking forward to it :hick:

The upcoming Thunder Chicken repaint

Reply #22
Have you thought about using grey molding with a white stripe?
Foxless :(

The upcoming Thunder Chicken repaint

Reply #23
Quote
Spend $100 and get this already. Sheesh


Don't.

Be cheap and go here:  http://www.gimp.org

download the latest version of Gimp (2.6.x) and GAP 2.2 (so you can make gif's :hick:)

The program has many other plugin's as well.
Best of all -- FREE

BTW -- For some reason, I can't see the pics, only red X's, but using my mind's eye, I'd have to say option #2
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

The upcoming Thunder Chicken repaint

Reply #24
Yeah, the pics don't work because of the cybersquatter that took over foxthundercats.com (as noted in the forum announcement). I just haven't gone back through and changed all the links to foxthundercats.net.

Hard to believe I posted this poll two years ago, painted the car over a year ago, and still haven't made up my mind about that moulding!
2015 Mustang GT Premium - 5.0, 6-speed, Guard Green - too much awesome for one car

1988 5.0 Thunderbird :birdsmily: SOLD SEPT 11 2010: TC front clip/hood ♣ Body & paint completed Oct 2007 ♣ 3.55 TC rear end and front brakes ♣ TC interior ♣ CHE rear control arms (adjustable lowers) ♣ 2001 Bullitt springs ♣ Energy suspension poly busings ♣ Kenne Brown subframe connectors ♣ CWE engine mounts ♣ Thundercat sequential turn signals ♣ Explorer overhead console (temp/compass display) ♣ 2.25" off-road dual exhaust ♣ T-5 transmission swap completed Jan 2009 ♣

The upcoming Thunder Chicken repaint

Reply #25
I would make the molding the same color as the bottom gray. And no stripe.
And if you don't hurry, mine will be done before yours. LOL
[SIGPIC][/SIGPIC]
***** Project "EVOLUTION" 1987 Cougar LS  & 1985 Cougar Convertible *****
[/COLOR]
5.0 HO 306 roller block, machined GT-40P heads, Wiseco dished forged pistons, Eagle forged floating I-beam connecting rods, Lunati pushrods, ARP bolts, Scorpion aluminum 1.6 rockers, Comp Cams Magnum 266HR, Explorer intake, 65mm TB, MAF Conversion, 19# injectors, Ford Racing stainless P-headers, 2-1/2" cat-less exhaust w/ Flowtech Afterburner lers , SC AOD with 2800 BDR torque converter, 3.73 T-Lok rear, CHE rear control arms, full 2-1/2" frame w/1" jacking rails & seat supports, Rear disk brakes, Turbine wheels, All original interior w/ floor shift upgrade .......
Pretty much every panel on my 87 is new, rebuilt, or re constructed. :D
Join us on Facebook

The upcoming Thunder Chicken repaint

Reply #26
Have you ever thought of using fiberglass filler and fill in where the strip is. I did it to my front bumper two years ago. Lots of sanding and shaping.
88 Sport, custom white 140 mph gauge, 11 in brake upgrade, stock mustang headers, bassani x-pipe, cherry bomb vortec lers, HO conversion
[SIGPIC][/SIGPIC]

The upcoming Thunder Chicken repaint

Reply #27
1, id paint the center strip in the moulding blue, the bottom of the car gun metal and the top white, black or light blue. i guess im bias though.
:america: 1988 Thunderbird Sport, Former 4.6 DOHC T56 conversion project.

Rest of the country, Welcome to Massachusettes. Enjoy your stay.

 
Halfbreed... Mango Orange Y2K Mustang GT
FRPP complete 2000 Cobra engine swap, T56 n' junk...
~John~