5.0 exhaust on a 3.8

Topic: 5.0 exhaust on a 3.8 (Read 691 times) previous topic - next topic

5.0 exhaust on a 3.8

August 12, 2006, 08:32:15 AM

Question: Will the stock exhaust from a 5.0 bolt up to the manifolds on a 3.8 without any modifications? Both cars have the same transmission and are pretty much identical except for the engines.

5.0 exhaust on a 3.8

Reply #1 – August 12, 2006, 09:13:28 AM

Not sure about STOCK stock, but Walker's single-ler version fits both years, both engines.
.

5.0 exhaust on a 3.8

Reply #2 – August 12, 2006, 10:23:29 AM

No the distance and angle of the manifold are different. I went through this with my 3.8 bird when I go it. If you can find a good ler shop they can cut and weld on a 5.0 H and make it fit. Which is what I did.

5.0 exhaust on a 3.8

Reply #3 – August 12, 2006, 09:59:17 PM

The 88 5.0 fake duals bolt up to a 3.8L

5.0 exhaust on a 3.8

Reply #4 – August 15, 2006, 01:09:04 PM

Here in a few days, I'm going to be putting a 5.0 Tbird y-pipe on my V6...I'll post the results here as to fit, etc..
according to MasterBlaster's chart, they'll interchange...