Caliper bore sizes January 03, 2006, 11:49:18 PM I am halfway through my 5 lug conversion. I have to finish building the rear axle at work tomorrow. Until I get enough parts gatherd up for the SN95 upgrade on the front, I am using 11" Stang spindles, and 11" Mark7 rotors. I have a pair of Mark7 calipers, but I am thinking about going to Stang calipers if they have a smaller bore. I think the Mark calipers are 73mm, anyone know what V8 Stang calipers are? Cant change the M/C right now ($), and the Mark calipers make the pedal too mushy. I am hoping to firm it up some if the Mustang calipers are smaller. Quote Selected
Caliper bore sizes Reply #2 – January 04, 2006, 01:37:10 PM I am going to use the Mustang calipers then. The Mark calipers that I was using made the pedal travel too far before anything started happening. Thanks again Chuck, you have been a huge help. Quote Selected
Topic: Caliper bore sizes (Read 968 times)
previous topic - next topic
