2.3T roller followers on aftermarket cams

Topic: 2.3T roller followers on aftermarket cams (Read 1437 times) previous topic - next topic

2.3T roller followers on aftermarket cams

September 21, 2005, 06:34:22 PM

i have a 420 lift Crane Cam and I have read several places that it is fine to run roller followers on any 2.3 cam. The cam now seems to be "eating" the stock followers and I thought it may be better to run rollers if someone knows for sure if it wont spit them out.

Any help would be appreciated.

Thanks,

Re: 2.3T roller followers on aftermarket cams

Reply #1 – September 21, 2005, 09:33:06 PM

what about your valve springs? they could be bottoming out causing excesive wear on your followers.

Re: 2.3T roller followers on aftermarket cams

Reply #2 – September 21, 2005, 09:38:28 PM

Quote from: 88turbo

what about your valve springs? they could be bottoming out causing excesive wear on your followers.

I wouldnt think so, but you never know. My friend I got the entire head, cam and all from was having no problems on his car. He blew a gasket and dropped in a 429 so I got the old lima head and cam complete. Now I have wiped out 2 followers. The cam looks fine so Im stummped. If this doest work this time Im going back to the Ranger Roller cam.

Re: 2.3T roller followers on aftermarket cams

Reply #3 – September 21, 2005, 09:58:34 PM

you might look into the springs or pull your cover and roll it over and see what they look like compressed

Re: 2.3T roller followers on aftermarket cams

Reply #4 – September 21, 2005, 10:04:36 PM

Quote from: 88turbo

you might look into the springs or pull your cover and roll it over and see what they look like compressed

Ive looked at it compressed it all looks fine geometry wise but there is just some little something not right. I am hoping the fact that he let it sit for a few months that it weakened the lifters. I know its a long shot but I can hope..

Re: 2.3T roller followers on aftermarket cams

Reply #5 – September 21, 2005, 10:23:45 PM

you can only run roller followers with a roller cam

when you put the cam in, did you put in all new sliders?

Re: 2.3T roller followers on aftermarket cams

Reply #6 – September 21, 2005, 10:30:24 PM

Quote from: Tbird232ci

you can only run roller followers with a roller cam

when you put the cam in, did you put in all new sliders?

No it was all new when my friend put it in around 3000 miles ago. I changed nothing til it started ticking and I found a wiped out tappet

Re: 2.3T roller followers on aftermarket cams

Reply #7 – September 21, 2005, 10:54:46 PM

Quote from: Tbird232ci

when you put the cam in, did you put in all new sliders?

everything was new and matched including valve spring retainers

i put about 3,000 miles on it with absolutley no issues

Re: 2.3T roller followers on aftermarket cams

Reply #8 – September 21, 2005, 11:15:47 PM

Yeah, you can't run roller followers with a flat tappet camshaft...

Re: 2.3T roller followers on aftermarket cams

Reply #9 – September 22, 2005, 10:23:13 AM

What kinda oil were you running?

theres always a debate on it, but ive been told many times that synthetic oil with a slider cam is no good

Re: 2.3T roller followers on aftermarket cams

Reply #10 – September 22, 2005, 05:29:21 PM

Quote from: Tbird232ci

What kinda oil were you running?

theres always a debate on it, but ive been told many times that synthetic oil with a slider cam is no good

10w40 valvoline >regular old dinosaur oil :D

i was wondering if a valve was almost froze in the guide maybe from sitting? like he said pulled right off mine and put aside till he came and got it a couple weeks ago

Re: 2.3T roller followers on aftermarket cams

Reply #11 – September 22, 2005, 05:54:20 PM

I drive a FORD.... i cant afford full Synthetic

Re: 2.3T roller followers on aftermarket cams

Reply #12 – September 22, 2005, 10:11:21 PM

Quote from: Back-In-Black87

I drive a FORD.... i cant afford full Synthetic

aint that the truth :hick:

Re: 2.3T roller followers on aftermarket cams

Reply #13 – September 29, 2005, 01:34:05 PM

I've heard that too, but haven't had any problems running Rotella T synthetic, but it's also a heavy duty engine oil that includes moly and calcium, zinc, etc., for high pressure parts.

Re: 2.3T roller followers on aftermarket cams

Reply #14 – October 03, 2005, 11:00:54 PM

I agree that you shouldn't run roller followers with a slider cam. I have run plenty of sliders on synth with no problem. 2.3 are pretty notorious for cam wear to begin with.
With .420 lift that won't cause any spring interference issues. I'd get new regular followers and follow proper slider cam breakin procedures.