Skip to main content ↑ ↓
Topic: need a dogbone for 8.8 rear (98 cobra are all 8.8 the same?) (Read 1331 times) previous topic - next topic

need a dogbone for 8.8 rear (98 cobra are all 8.8 the same?)

I'm swapping a tranny for a 98 Cobra for someone and I noticed that the dogbone on the rear is bouncing all over the place when I was taking off the driveshaft. So I'm looking for one

thanks
[SIGPIC][/SIGPIC]

need a dogbone for 8.8 rear (98 cobra are all 8.8 the same?)

Reply #1 –
What is a dog bone?
[SIGPIC][/SIGPIC]:ford:87 Turbo Coupe through the floor sub frame connectors, 5.8 swap Ford racing heads Harland sharp 1.6 rockers BBK shorty swap headers 2 1/2 BBk X pipe magnaflow ler's. Megasquirt 2 with 36lbs injectors on hurricane intake with 4150 throttle body.Tremec TKO 600 Quicktime blowsheild spec stage 3 clutch. 3.73 gears and still not done

need a dogbone for 8.8 rear (98 cobra are all 8.8 the same?)

Reply #2 –
The weight on a 8.8 rear that's shaped like a dog bone.. It has something to do with harmonic damping of the drivetrain frequency that occurs in the drivetrain.. There's a paper written that explains it..written by Jerry the ford engineer responsible for the j-mod..

my source thread (post #14).. hope it's good info, would hate to be that guy(lol).
http://vb.foureyedpride.com/showthread.php?158172-8-8-vibration-damper-(aka-dogbone)-bushings
[SIGPIC][/SIGPIC]

need a dogbone for 8.8 rear (98 cobra are all 8.8 the same?)

Reply #4 –
oh. I called that extra weight and torched it off and put axle braces and  welded it from holes  to the  tubes. My bud has some 8.8's laying around ill check.
[SIGPIC][/SIGPIC]:ford:87 Turbo Coupe through the floor sub frame connectors, 5.8 swap Ford racing heads Harland sharp 1.6 rockers BBK shorty swap headers 2 1/2 BBk X pipe magnaflow ler's. Megasquirt 2 with 36lbs injectors on hurricane intake with 4150 throttle body.Tremec TKO 600 Quicktime blowsheild spec stage 3 clutch. 3.73 gears and still not done

need a dogbone for 8.8 rear (98 cobra are all 8.8 the same?)

Reply #5 –
Should interchange between all of the 8.8" axles.


cheers
Ed
84 Mustang SVO
95 Jaguar XJR

need a dogbone for 8.8 rear (98 cobra are all 8.8 the same?)

Reply #6 –
Ok thanks, if you have one shoot me a price shipped to 19102 PayPal
[SIGPIC][/SIGPIC]

need a dogbone for 8.8 rear (98 cobra are all 8.8 the same?)

Reply #7 –
Will do. I'll be heading over there today.
[SIGPIC][/SIGPIC]:ford:87 Turbo Coupe through the floor sub frame connectors, 5.8 swap Ford racing heads Harland sharp 1.6 rockers BBK shorty swap headers 2 1/2 BBk X pipe magnaflow ler's. Megasquirt 2 with 36lbs injectors on hurricane intake with 4150 throttle body.Tremec TKO 600 Quicktime blowsheild spec stage 3 clutch. 3.73 gears and still not done

need a dogbone for 8.8 rear (98 cobra are all 8.8 the same?)

Reply #8 –
Didn't make it yesterday. Try again today
[SIGPIC][/SIGPIC]:ford:87 Turbo Coupe through the floor sub frame connectors, 5.8 swap Ford racing heads Harland sharp 1.6 rockers BBK shorty swap headers 2 1/2 BBk X pipe magnaflow ler's. Megasquirt 2 with 36lbs injectors on hurricane intake with 4150 throttle body.Tremec TKO 600 Quicktime blowsheild spec stage 3 clutch. 3.73 gears and still not done

need a dogbone for 8.8 rear (98 cobra are all 8.8 the same?)

Reply #9 –
Didn't make it yesterday. Try again today
[SIGPIC][/SIGPIC]:ford:87 Turbo Coupe through the floor sub frame connectors, 5.8 swap Ford racing heads Harland sharp 1.6 rockers BBK shorty swap headers 2 1/2 BBk X pipe magnaflow ler's. Megasquirt 2 with 36lbs injectors on hurricane intake with 4150 throttle body.Tremec TKO 600 Quicktime blowsheild spec stage 3 clutch. 3.73 gears and still not done

need a dogbone for 8.8 rear (98 cobra are all 8.8 the same?)

Reply #10 –
I'll look to

I take th off when I do gear swaps

need a dogbone for 8.8 rear (98 cobra are all 8.8 the same?)

Reply #11 –
Is this what your looking for?
[SIGPIC][/SIGPIC]:ford:87 Turbo Coupe through the floor sub frame connectors, 5.8 swap Ford racing heads Harland sharp 1.6 rockers BBK shorty swap headers 2 1/2 BBk X pipe magnaflow ler's. Megasquirt 2 with 36lbs injectors on hurricane intake with 4150 throttle body.Tremec TKO 600 Quicktime blowsheild spec stage 3 clutch. 3.73 gears and still not done
 

need a dogbone for 8.8 rear (98 cobra are all 8.8 the same?)

Reply #12 –
Sorry I miss your post somehow. 

It's the dogbone weight in the picture. Send me a paypal price for everything that the weight uses to bolt on the rear (nuts, bolts.. etc) shipped to 19102.

thanks,

Bob
[SIGPIC][/SIGPIC]