Skip to main content ↑ ↓
Topic: Moats QH, 302 engine harness, A9l with chip + more (Read 834 times) previous topic - next topic

Moats QH, 302 engine harness, A9l with chip + more

All prices shipped

Moats QH - Sold
Rest of the stuff came from a Mass-Flo efi setup, car ran at strip for 2 summers, prob less than 200 miles on it all.
302 Engine Harness - 340 (minor dmg, 3 plugs are pulled loose but undamaged, just need recrimped, minor scuffing on a few wires)
A9l with Chip - Sold
Mallory Billet Dist (tfi) - 225
Also have the Mass Air Flow sensor from the kit, should work with any fuel injected throttle body. Will take 150 for it.


If you have questions or think I'm high just PM me and I'll be happy to talk.

Thanks,
Alan.
88 Turbocoupe: Coast High Performance 331 kit 28oz balance, Comp XE264HR14 cam, 58cc 185 afr heads, 1.7 roller rockers, Mass-Flo EFI (was POS to setup and their techline is a joke at best)
Full 1 5/8 primary equal length headers, 2 1/2 exhaust, Full manual reverse VB c4 and baked off clear coat "BECAUSE RACECAR"

Moats QH, 302 engine harness, A9l with chip + more

Reply #1 –
QH Sold
88 Turbocoupe: Coast High Performance 331 kit 28oz balance, Comp XE264HR14 cam, 58cc 185 afr heads, 1.7 roller rockers, Mass-Flo EFI (was POS to setup and their techline is a joke at best)
Full 1 5/8 primary equal length headers, 2 1/2 exhaust, Full manual reverse VB c4 and baked off clear coat "BECAUSE RACECAR"
 

Moats QH, 302 engine harness, A9l with chip + more

Reply #2 –
A9L Sold
88 Turbocoupe: Coast High Performance 331 kit 28oz balance, Comp XE264HR14 cam, 58cc 185 afr heads, 1.7 roller rockers, Mass-Flo EFI (was POS to setup and their techline is a joke at best)
Full 1 5/8 primary equal length headers, 2 1/2 exhaust, Full manual reverse VB c4 and baked off clear coat "BECAUSE RACECAR"