88 TC parts

Topic: 88 TC parts (Read 720 times) previous topic - next topic

88 TC parts

July 01, 2013, 03:08:23 PM

Selling pretty much everything that makes a TC a TC except the body parts, brakes, transmission, and rearend. Doing a 5.0 swap and converting to normal struts and brakes. Hate me if you must, but it's my car :flip: Basically trying to recreate my old 88 Sport, I would even trade the TC header panel and inner lights straight across for a 87-88 LX/Sport header panel and inner lights.
All parts are off an 88.
-Engine. ran good, no funny sounds other than wasted turbo. mileage unknown, bought car with no cluster. - $125
-Bellhousing with for and throwout - $60
-Master, Slave, and line - $40
-TEVES ABS pump. Brakes worked good when I drove it home, no issues that I recall - $100
-Alternator - $20
-Intake with injectors and throttle body - $50
-VAM - $50 Actually have 2, price is each
-LA3 - $50
-Engine Harness - $50
-PRC Harness - $30
-PRC computer - $30
-PRC Struts w/ actuators. Honestly unsure of condition, PO had all 4 unplugged for some reason. - $10 each
-AC compressor. Unsure of condition - $15
- Factory radio and Equalizer. Redoing entire stereo, will not need it. Works, couple slides on the EQ are a little touchy, but works - $25

Prices are OBO + Shipping. May be willing to trade for 5.0 parts.

88 TC parts

Reply #1 – July 01, 2013, 05:37:36 PM

what kind of 5.0 parts are you looking for? I have a 5.0 swap fuel rail that I made for my TC swap (F150 rail) complete rail and fuel lines. and some other 5.0 parts. interested in the E6 manifold and the LA3 possibly the engine harness also. let me know what you're looking for

88 TC parts

Reply #2 – July 01, 2013, 06:30:53 PM

well, all I have so far is a the 5.0 harness, injectors, MAF sensor, mounts, Aluminum mustang valve covers, throttle body, various sensors, headers, and h-pipe. Need pretty much everything else. What else do you have? By E6, you are refering to the intake manifold correct? my e6 exhaust manifold is junk

88 TC parts

Reply #3 – July 01, 2013, 09:24:00 PM

Found an 87 Sport I may end up buying. Wrecked in the front end, but I can use my front clip on it. Swap in my 8.8, front brakes, and 5 speed swap it and I will be a lot farther ahead than I would be converting the TC into a Sport...

May have a lot of other stuff added to this thread in the next couple days

88 TC parts

Reply #4 – July 01, 2013, 10:35:57 PM

Interested in intake.

88 TC parts

Reply #5 – July 02, 2013, 12:07:40 PM

Have an HO can and roller lifter setup. 65mm throttle body, various intake plates, and an explorer upper (non egr)

88 TC parts

Reply #6 – July 03, 2013, 10:13:20 PM

If nobody speaks up in the next day or two I will be listing most of this on eBay, I'm liking the prices people pay for stuff on there a lot more than the prices i listed this stuff at anyways...

Think I am just going to go carburated on it though, so I won't need any FI stuff.