TC T5 to 5.0 February 17, 2013, 09:41:36 PM I know this has been discussed before but I cant seem to find the thread. I need to know what year/engine of probe pilot bearing is used when using the TC T5 behind a 5.0 Thanks:bowdown: Quote Selected
TC T5 to 5.0 Reply #1 – February 17, 2013, 09:47:07 PM I used a 5.0 one fine but I hear a lot of different ones you can use ill let others chime in I used a svo trans in my 5.0 stang it turned it into a rocket ship but highway rpm suffers bad And the fact that it will blow sooner that a already week t5 Quote Selected
TC T5 to 5.0 Reply #2 – February 17, 2013, 09:54:46 PM i have a 4 cly t5 in mine I used, i think it was a 82 or 83 diesel ranger pilot bearing, it fits exactly in the crank and on the input shaft, a v8 one with the 4 cylinder t5 has to much play when I got my mustang with that setup it was hard to get in gear and had a bad vibration so I tore the tranny out to find it had a v8 t5 pilot bearing and check the input shaft bearing and all to lucky have it to be in good shape so I caught that at the right time. I also heard one for a probe gt will work but I know the diesel ranger one does. Quote Selected
TC T5 to 5.0 Reply #3 – February 17, 2013, 10:05:42 PM I never had vibration or anything I also went 13.50's with it But yea what you said better safe than sorry Quote Selected
TC T5 to 5.0 Reply #4 – February 17, 2013, 10:20:12 PM yeah I can't remember the size difference but there is a difference for sure because when i put my stuff back together before putting it in this bird I had to eye ball the clutch disc and all to get the line up right as my v8 line up tool wouldn't work even sanded on the small end for a good 30 mins with 100 grit paper still not close enough. Quote Selected
TC T5 to 5.0 Reply #5 – February 17, 2013, 10:30:54 PM Well, my info says an '89 Probe GT pilot bearing will work.. Quote Selected
Topic: TC T5 to 5.0 (Read 1043 times)
previous topic - next topic
