Skip to main content ↑ ↓
Topic: console question (Read 1053 times) previous topic - next topic

console question

X
I have tried but this is the best I can get the corner of the coin tray to line up with the dash radio bezel, is this correct?

console question

Reply #1 –
X
by this picture, looks like I need to adjust forward some more, have to try and see, worried about 2nd and 4th gear hitting console.  I don't like that little gap I see on that corner.
 

console question

Reply #2 –
Try a little adjusting. I use the older full length console in my '88. Had to do some minor plasic tpuppies where the front "ears" of the console line up under the dash, but it looks like it was born with the car now. Minor tweaking.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..